Recommended Flat Towing Components For A 2024 Jeep Wrangler Rubicon 4xe

Published 06/20/2024

Products Featured in This Question

Roadmaster Smart Diode Kit for Variable Voltage LED Tail Lights - 7-Way to 6-Way Adapter Cord

(287)

$216.25

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3186)

$179.96

Roadmaster Battery Charge Line Kit for Towed Vehicles

(1199)

$45.64

Roadmaster Battery Charge Line Kit for Motorhomes

(140)

$67.45

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$575.00

Roadmaster Universal Stop Light Switch Kit

(622)

$126.53

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3324)

$575.00

Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Proportional

(494)

$1329.00

Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional

(754)

$1175.00

Question:

Looking for a wiring harness with wire to charge the battery for a 2024 rubicon 4xe also what brake system do you recommend thank you

asked by: Gerry S

Expert Reply:

Hey Gerry,

I have the following flat towing component recommendations for your 2024 Jeep Wrangler Rubicon 4xe:

Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267. If you have ParkSense proximity sensors then you'll need smart diodes # RM63MR instead to properly transfer the light signals.

Charge line: For the vehicle side you'll need part # RM-156-25. If your motorhome doesn't already have a charge line ran to the center pin of the 7-way then you'll also need part # RM-156-75.

Braking System: If your motorhome has air brakes then you'll want the Demco Air Force One # SM99243. If your motorhome has hydraulic brakes then you'll want the Demco Stay-IN-Play Duo # SM99251 instead. The Stay-IN-Play Duo requires tapping into the brake light switch, which is unusable in your Jeep so you'll need to install a stop light switch kit # RM-751000 for the braking signal.

If you haven't picked out the rest of your components then I also recommend the following:

Baseplate: If you have a steel bumper with built in winch you'll need the Roadmaster Direct-Connect Base Plate Kit # RM35GR. If you have a factory bumper without a winch then you'll want part # RM-521453-5 instead.

Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. Thgis tow bar comes with safety cables included and a built in rise/drop to help keep the tow bar level between the motorhome and Jeep to avoid having to also purchase a high/low adapter.