How Would Redarc Tow Pro Liberty Install with ETBC7 on 2022 Nissan Pathfinder

Question

Question:

I purchased and installed part # ETBC7L into my 2022 Pathfinder SV, which did not originally have the tow package. I rather not use the Curt Echo Wireless controller and would prefer the Redarc Trailer Brake Controller RED52VR. How would I wire this to the 7 Way?

asked by: Ron P

0

Expert Reply:

Hey Ron, so to install the Redarc Tow Pro Liberty part # RED52VR in your 2022 Nissan Pathfinder using the # ETBC7L is pretty simple as you basically have everything you need already minus a length of 10 gauge wire to run from the controller back to the blue wire of the 7-way adapter.

What you'd need is 10 gauge wire like the part # 10-1-1 which we sell by the foot for that. I am not sure exactly how many feet you'd need but you can probably determine that pretty easy.

expert reply by: Jameson C

0

Ron P.

6/14/2024

But wouldn't I need power supply going to the brake controller? Or are the Pathfinders pre-wired? Have heard mixed reports on this. My car came without the tow package.

Jameson C.

6/16/2024

@RonP Yes you need a wire for that too sorry I forgot that. I'd use the part # 10-2-1 to run two wires for this. One for power and one for ground.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 4

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 5

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 6

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

Answer 7

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 8

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 9

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 10

Hey Eddy, this is a great question but for the 2023 Chevrolet Traverse with the factory tow package, there is factory brake-controller wiring behind the driver's-side kick panel, but there is not a plug-and-play connector/adapter available for…

view full answer...

Answer 11

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 12

Hey Jonathan, congrats on the new truck! The Universal Mounting Panel item #331-TPSI-001 is what you'll need to install the control knob of the Redarc Tow-Pro Liberty item #RED53CR in your 2026 Nissan Frontier SV. It measures 1-8/16" tall x…

view full answer...

How Would Redarc Tow Pro Liberty Install with ETBC7 on 2022 Nissan Pathfinder

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching