Recommended Trailer Hitch for a 2020 Ram ProMaster City

Question

Question:

I am looking for a hitch for my 2020 Promaster City. I found this: Draw-Tite 75219 and also on this page I found two: Code C13215 and Code e96YR. What are the differences? They seem to have the same specs? Thanks, Bill

asked by: Bill

0

Expert Reply:

You're pretty much right on, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75219, the etrailer Trailer Hitch Receiver # e96YR, and the Curt Trailer Hitch Receiver # C13215 are pretty much the same. The only differences are going to be the brand, where it's made, and the finish on the hitch.

Other than that, these hitches are the exact same. If it were me, I'd go with the etrailer Trailer Hitch Receiver # e96YR because it's made in the USA, and it has a nice matte black finish.

expert reply by: Bryce D

0

Answer 1

When we installed the Curt Trailer Hitch Receiver #C13215 on a 2018 Ram ProMaster City, we measured it to have 9" of clearance to the ground. This measurement may differ with your 2017 Ram ProMaster City as depending on cargo loading, that will…

view full answer...

Answer 2

Just a single difference exists between the Curt and etrailer trailer hitches for your 2021 Ram ProMaster City, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Trailer Hitch for a 2020 Ram ProMaster City

Products Featured in This Question

Continue Researching