Will the Thule LoadStops Work W/ Yakima HD Crossbars

Question

Question:

Will these Thule Load Stops work on my Yakima HD Cross bars?

asked by: Jeffrey G

0

Expert Reply:

Yes Jeffery, the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac # 753-3761 will work with your Yakima HD crossbars.

expert reply by: Bryce D

0

Jeffrey G.

5/26/2024

Are these Thule Part # 502 load stops ?

Bryce D.

5/27/2024

@JeffreyG Yes Jeffery the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, and Thule TracRac CapRac # 753-3761 is Thule's part 502.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 5

Hey Dennis, welcome back. You are thinking about this the right way. On your 2025 Tundra 1794, you can remove the active spoiler itself and leave the motor/actuator plugged in and mounted. There are a few things to keep in mind though. First,…

view full answer...

Answer 6

Hey Brian! Yes, the Firestone Ride-Rite Air Helper Springs #F89VV will fit your 2025 Toyota Tundra. That is just the generic picture attached to that page, I can see how it would be confusing. These are designed to mount over the axle, and are…

view full answer...

Answer 7

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 8

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 9

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 10

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 11

Shawn, good question - the Firestone air bag kit #F59XV kit can still work on your lifted 2025 Tundra as long as the factory rear jounce bumpers are still in place. If your truck has a true 3" rear lift, you can use Firestone’s 3" lift…

view full answer...

Answer 12

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Will the Thule LoadStops Work W/ Yakima HD Crossbars

Product Page this Question was Asked From

Continue Researching