What Size Water Pipe Connections Are On The Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout?

Question

Question:

Are the water connections 1/2inch male threads?

asked by: Logan

0

Expert Reply:

Yes, the Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout # EM65CR does use 1/2" male pipe threads to attach to the hot and cold water lines.

expert reply by: Bud M

0

Mark

11/12/2024

My water feed lines are 3/8 inch plastic tubing with a rubber taper connection and it’s secured with a 7/16 screw connecting to the faucet. How can we connect the couplers from my feed line into the threaded end of this faucet?

Bud M.

11/12/2024

@Mark You will need to get an adapter from your local hardware store to adapt to the larger line size.

Answer 1

I went out to the warehouse and measured the Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout #EM42HR and measured 14-1/2" from the threads to the end of the longer water lines, and 5-1/2" from the threads to the end of the shorter water…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6 inch whereas the 225/75-15 fits widths that are 5 inch to 6-1/2 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

I apologize for any confusion on what the proper torque specs are for 1/2 inch lug nuts on trailer wheels. I attached a picture of a chart to the right that details what the proper torque specs are for a trailer wheels lugs based on lug size, wheel…

view full answer...

What Size Water Pipe Connections Are On The Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching