Will The Timbren Suspension Enhancement Fit a 2024 Chevrolet Silverado 1500 ZR2?

Question

Question:

i have a 2024 ZR2 want to put in timbren suspension in rear of truck which one will fit this truck?

asked by: Todd S

0

Expert Reply:

While I can confirm the Timbren Rear Suspension Enhancement # T28MR will fit your 2024 Chevy Silverado 1500 ZR2, I would be hesitant to put such a heavy spring on your truck. I would personally select the SumoSprings # SS65FR as these will actually help to absorb road shock where the heavy Timbren's would transfer it to the truck. I only like using Timbren springs on very heavy duty applications such as trucks with a plow or work box in place of the bed.

expert reply by: Bud M

0

Answer 1

The Timbren Suspension Enhancement System part #T28MR and SumoSprings Solo Custom Helper Springs part #SS45FR are both great options for a 2021 GMC Sierra 1500 AT4. I recommend the SumoSprings as they don't typically ride as rough as the Timbrens…

view full answer...

Answer 2

For your 2012 Toyota Tundra CrewMax, you will want to use part #TTORTUN4 for the Timbren Rear Suspension Enhancement System or part #SSR-610-47 for the SumoSprings Solo Custom Helper Springs. Both of these options will provide you with additional…

view full answer...

Answer 3

The main difference when comparing Timbren and SumoSprings for suspension enhancement is going to be the weight capacities. Timbren uses hollow rubber springs that is able to support more weight but they can cause a firmer ride. The SumoSprings are…

view full answer...

Answer 4

The rear Timbren kit you'd want for your 2024 GMC Sierra 1500 is the part #T28MR which is the standard duty version. This will give you a better blend of support and ride quality than the severe duty version part #T53MR which would be a lot…

view full answer...

Answer 5

Yes, the Timbren Suspension Enhancement System #T28MR will be the best option when it comes to cost-effectiveness. This will fit with your 2021 Chevrolet Silverado 1500 Z71 Trail Boss but you'll want to make sure these fit the gap properly. The…

view full answer...

Answer 6

For your 2021 Chevrolet Silverado 1500 Trail Boss, I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle item #SS45FR over the Timbrens. There are no compatibility issues with your Trail Boss edition Silverado. The SumoSprings have…

view full answer...

Answer 7

With the SumoSprings Solo Custom Helper Springs #SS45FR or #SS65FR installed on your 2021 Chevrolet Silverado 1500 with no additional cargo weight you will see 1/2" of clearance between the spring and your axle pad. This allows for you to have a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...