Recommended Trailer Hitch for a 2017 Volvo S60

Question

Question:

Hi, looking for a hitch that will fit a 2017 Volvo S60 cross country

asked by: Jenny E

0

Expert Reply:

Jenny, for your 2017 Volvo S60 I recommend checking out the etrailer Trailer Hitch Receiver # e77KR. This hitch has a class III 2" receiver opening, a max weight capacity of 3,500 lbs, and a max tongue weight of 350 lbs.

expert reply by: Bryce D

0

Jenny

5/17/2024

Hi Bryce, thanks for the quick response. Just wanting to double check that I have a 2017 Volvo S60 Crosscountry. Volvo made the S60 and the S60 Crosscountry. I'm looking for a hitch that will fit the crosscountry.

Bryce D.

5/17/2024

@Jenny Yes the etrailer hitch # e77KR will work with all models of the S60 to include the Cross Country.

Jenny

5/17/2024

@BryceD would you mind sharing the source that the #e77Kr will worl in the 2017 S60 Crosscountry? The e trailer's website indicates it will not fit my vehicle. Trusting but would like to verify! It's an expense to order then return the hitch. Thanks so much.

Bryce D.

5/17/2024

@Jenny Where are you reading that it won't work, I'm curious? But we've confirmed it's fit through customers who've installed it.

Answer 1

Yes, we do. To add a 2" hitch to your 2012 Volvo XC70, I recommend the etrailer Hitch item #e77KR. This hitch is custom fit and bolts to your Volvo with included hardware. This is a class III hitch with a 2" receiver. It has a 350 lbs…

view full answer...

Answer 2

There are two different sets of tail lights on a 2013 Volvo XC70, a pair in the quarter panel at chest height and a pair in the lower bumper at knee height. I took a look at all the trailer wiring harnesses for a 2013 Volvo XC70 (Curt T-Connector…

view full answer...

Answer 3

Trailer wiring harnesses for your 2011 Volvo XC70 use powered converters to draw the power for the trailer's wiring. This prevents the taillights of your Volvo from having to power the trailer wiring. The Hopkins kit part #HM11143735 that fits…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Recommended Trailer Hitch for a 2017 Volvo S60

Continue Researching