Will EcoHitch Trailer Hitch Fit a 2023 Tesla Model S Plaid

Question

Question:

Will this fit on a 2023 Tesla Model S Plaid?

asked by: JD

0

Expert Reply:

Hey JD, thanks for reaching out!

According to my research the 2023 Tesla Model S Base and Plaid versions have the same rear fascia (or very nearly the same) so the EcoHitch Stealth Trailer Hitch Receiver # EH36SR will fit both styles perfectly!

If you let me know what you plan on using the hitch for I'd be happy to make any additional recommendations for you!

expert reply by: Jon G

0

Jd

4/30/2024

Thanks Jon. Its for a thule 4 bike rack carrier. I do not have any ambitions of towing anything greater. Thank you for the prompt reply.

Jon G.

4/30/2024

@Jd Sounds like you're all set!

Answer 1

I do have some installation assistance for you with a trailer wiring harness like the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness part #C59496 which is what I recommend for a Telsa Model S but we cannot comment on videos…

view full answer...

Answer 2

To run a charge line to your battery you will first need to install a 7-Way on your trailer. This can be done using the Epicord 7-Way Molded Trailer Plug with Junction Box #277-000141. The Black wire in the junction box is the one that will carry the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will EcoHitch Trailer Hitch Fit a 2023 Tesla Model S Plaid

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching