Trailer Wiring Recommendation for 2016 Hyundai Elantra GT Korean Built

Question

Question:

I'm looking for the correct wiring for the same car. (2016 Elantra GT Korean) BUT, I have LED taillamps. Curt 56283 does Not work Any help would be appreciated

asked by: Narvin

0

Expert Reply:

Hey Narvin, the trailer wiring kit you'd want for your 2016 Hyundai Elantra GT Korean is the Tekonsha part # 118692 which is a confirmed fit and has the most reliable converter box.

expert reply by: Jameson C

0

Answer 1

For your 2016 Hyundai Elantra GT hatchback that was made in Korea (second letter of VIN is letter M) the Curt hitch part #C11400 is the hitch you'd need as it's the correct fit. If you were looking for trailer wiring too the Tekonsha kit part…

view full answer...

Answer 2

The light-duty Class I hitch #C11400 is a confirmed fit on the GT Hatchback version of the 2016 Hyundai Elantra. We have not had a local customer come in for an install of this particular hitch on your particular vehicle so we do not have the…

view full answer...

Answer 3

We rate hitch installation difficulty based on the amount of time it takes for a professional or skilled layman to complete the installation. The hitch that takes the least time to install is Draw-Tite hitch #24905. The estimated pro installation…

view full answer...

Answer 4

Your 2022 Hyundai Ioniq PHEV is going to require the Vehicle Wiring Harness #C56381. The Curt Harness #C56233 you found is only for the Blue hybrid trim. I currently see the PHEV was only offered for the SE, SEL and Limited trims.

view full answer...

Answer 5

I spoke to my contact at Curt and he said that the reason you remove the nut of the module and enlarge the hole is so that it can be moved out of the way to allow the hitch part #C11400 to fit. I attached a picture that points out the correct nut…

view full answer...

Answer 6

Before installing a trailer hitch on your 2016 Hyundai Elantra you first have to tow according to the towing limits posted in your owner's manual. No matter the weight rating for the trailer hitch, the towing capacity of your vehicle takes…

view full answer...

Answer 7

If you are sure the trailer would weigh 650 lbs you can tow it with your 2016 Hyundai Elantra GT as it has a towing capacity of 750 lbs. So you'll need a trailer hitch for that like with the Draw Tite part #24905 that is a confirmed fit for your…

view full answer...

Answer 8

Hyundai is a South Korean vehicle manufacturer, but not all of their vehicles, including the Elantra GT are made in South Korea. The 2013 Elantra GT was made in South Korea, Czech Republic and Egypt. The GTs coming out of the South Korean plant did…

view full answer...

Answer 9

According to the folks at Draw-Tite, the reason the #24905 Class I hitch won't fit Korean manufactured models is that the rear bumper/frame area of the vehicle is slightly different on Korean made models. The exhaust is routed differently, and…

view full answer...

Answer 10

The manual transmission 2016 Hyundai Elantra is flat-towable as-is. You would just need the base plate part #521632-1 as it is a confirmed fit. I attached an install video for this for you to check out as well. I am sure the 2017 model will be as…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C11400 referenced in your question is confirmed to fit the 2013 Hyundai Elantra GT Hatchback. It will use existing holes in the vehicle's frame for a no-drill installation and it does indeed fit models built in…

view full answer...

Answer 12

We do indeed have one trailer hitch receiver that fits your 2016 Hyundai Elantra GT Hatchback that was built in Korea. The hitch is from Curt, and the correct part number is the following: - Curt Trailer Hitch Receiver #C11400 The #C11400 has been…

view full answer...

Trailer Wiring Recommendation for 2016 Hyundai Elantra GT Korean Built

Continue Researching