What Wire On The Demco Wireless Coachlink Monitor Is For Power?

Question

Question:

purchased demco the stay n play system from you and ordered the. coachlink. the cigarette fitting broke on the demco coach link i have the stay n play in a 2014 honda and a tow with a gas 2005 winnebago adventurer the wiring coming out of the coachlink unit is red and black. i need to know which wire is the positive wire by color since demco did not answer my email on how to repair i purchased a quality cigarette plug from autozone by road proof. it has a black and white wire the paperwork with it says says the black wire is positive and the white wire is negative. so answer needed is on the demco coachlink unit which wire is positive. the red wire or the black wire

asked by: Toni C

0

Wiring On Demco Wireless Coachlink Monitor
(click to enlarge)

Expert Reply:

I was able to verify with Demco the red wire on the Coachlink # SM99945 for the Demco Stay-IN-Play # DM86VR is positive and the black is negative.

expert reply by: Bud M

0

Toni C.

4/19/2024

Many thanks for the quick reply. etrailer is the best had yet to let me down

Reply

Bud M.

4/20/2024

@ToniC You're welcome!

Reply

Answer 1

The only thing I can think of that could cause an issue like this is that you have indicator light wired incorrectly to something that has power when not connected to the motorhome. In the typical setup you would connect the power for the indicator…

view full answer...

Answer 2

Hey Robert, whether or not you need the Brake Lite Relay part #RM-88400 is going to be based on the supplemental braking system you are using and the taillight setup of your 21 Wrangler Unlimited. If your supplemental braking system depresses the…

view full answer...

Answer 3

To wire in the Coachlink transmitter from the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR you'll connect the red wire from the transmitter to the cold side of the brake light switch, which would be a white/brown wire for your…

view full answer...

Answer 4

The OEM brake switch on your 2024 Jeep Wrangler is actually not usable for this purpose. You will instead need to use the Roadmaster Universal Stop Light Switch Kit #RM-751000. This will tap into the towed cars brake switch and allow the Invisibrake…

view full answer...

Answer 5

You will have to use a 12V outlet to power the Demco Wireless Coachlink Braking Monitor #SM99945. Since you don't already have one you can add it using the 12 Volt Outlet Kit, 20 amps #RM-9332.

view full answer...

Answer 6

Normally you can find the brake light switch under the dashboard at the top of the brake pedal. There could be a number of wires attached to the switch so you can use a tester like part #PTW2993 to test the wires. Since the auto manufacturers can use…

view full answer...

Answer 7

For your 2021 Jeep Wrangler, you actually can not splice into the brake wire. For this reason, you will want to use the Roadmaster Stop Light Switch Kit #RM-751490 instead. This kit will connect to an inline fuse to your vehicles positive terminal on…

view full answer...

Answer 8

For your 2018 Jeep Wrangler Unlimited Sahara JL flat tow wiring, you will need the Roadmaster Stop Light Switch Kit #RM-751490 which will communicate with your motorhome's brake monitoring system that your Jeep brakes are being applied. This is…

view full answer...

Answer 9

In your 2017 Jeep Cherokee Latitude, I unfortunately can't tell you which wire is the correct color for your brake controller, but I can tell you how to determine that. You will need to use a circuit tester like #PTW2993 and test each wire coming…

view full answer...

Answer 10

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

view full answer...

Answer 11

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 12

In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low…

view full answer...

What Wire On The Demco Wireless Coachlink Monitor Is For Power?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching