Are There Pre-Greased Versions Of The Dexter 008-435-05 Hub/Rotor
Updated 04/12/2024 | Published 03/30/2024
Products Featured in This Question
Question:
Going on a long trip with boat and trailer and want to be prepared for a hub issue. Currently have the Dexter hub rotor part number 008-435-05 with Vault system, they look good but almost 10 years old. Is there a pre greased hub that could be used for emergency repair on side of road, instead of re packing the Dexter system?
asked by: Wendell P
Expert Reply:
Hi Wendell,
We do offer compatible replacement hub/rotors for your Dexter 008-435-05 but they unfortunately do not come pre-greased. I recommend picking up the # K08-435-05 as well as bearings # L68149 and # L44649, and grease seal # RG06-050 to pre-pack the hub yourself with some lube # L11380 before the trip. To prevent the bearings from falling out or any dirt/debris from getting inside the hub you can put two layers of plastic wrap over the holes and rubber band them down.
Product Page this Question was Asked From
Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Q&A: Replacement Disc Brake Rotor/Hub For a 1990 Ranger Trail Boat Trailer
- Shop: 25 ft. Wishbone 4-Way Trailer Wiring Harness with 42" Ground Wire
- Shop: 40 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Shop: 25 Ft 5-Way Trailer Wiring Harness - Wishbone Style - 30" Ground - 5' Auxiliary Wire
- Shop: 30 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Q&A: Replacement Hub-and-Rotor Assembly for 2000 640 Ranger Boat Trailer With Tandem Axles
- Q&A: Can Larger 3,500 lb Brake Rotor Be Used As Replacement On Trailer
- Search Results: 10k trailer jack
- Search Results: trailer wiring
- Search Results: rg06~050
- Search Results: l11380
- Search Results: ufp caliper
- Search Results: 41071
- Search Results: ufp brake caliper
- Q&A: Replacement Hub/Rotor for UFP 41030
- Q&A: Replacement Disc Brakes for 2018 Load Rite Boat Trailer With TDE 660
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Q&A: Will Aluminum Hi-Spec Series 04 Star Mag Trailer Wheel # AM20258 Work with ST175/80R13
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Article: Trailer Wiring Diagrams
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
Wendell
4/11/2024
I have purchased your recommendations and have two follow up questions. Do you have a recommendation for a cap for the hub - like a bearing buddy? Also, is there any concern with mixing the recommended grease with another grease I have in my grease gun - Lucus marine grease?