Will The Lomax Tonneau Cover # LOM65QR Work With A TruXedo Elevate Ladder Rack

Question

Question:

Is the LOM65QR toneau cover compatible with the elevate rack and bed rails?

asked by: Brian

0

Expert Reply:

Hey Brian,

Since the Lomax Hard Tonneau Cover # LOM65QR sits inside of the bedrails you will be able to use in conjunction with a TruXedo Elevate Ladder Rack # TX46NV on your 2017 Toyota Tundra.

expert reply by: Kevin C

0

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is a confirmed fit for a 2022-2023 Nissan Frontier Pro 4X. I check with Draw-Tite for you to confirm. It's the same front hitch as the previous generation so that is where there may be…

view full answer...

Answer 2

Yes, you can! To add a front hitch to a 2023 Nissan Frontier, I recommend the Draw-Tite item #65075. This front mounted hitch is custom fit and bolts to your Nissan with included hardware. It comes with a 2" receiver that has a 5,000 lbs towing…

view full answer...

Answer 3

I am happy to verify for you that your 2023 Nissan Frontier Pro 4X is 100% compatible with the Draw-Tite front hitch that fits, which is the following part number: - Draw-Tite Front Mount Trailer Hitch Receiver #65075 So you will have no issues…

view full answer...

Answer 4

In order to use a snowplow on the 2022 Nissan Frontier you'll need a front mount trailer hitch, the Draw-Tite Front Mount Trailer Hitch Receiver part #65075 is currently our only option for this. The hitch does require removal of the lower air…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 10

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 11

I recommend the Redarc Tow-Pro Liberty #RED24FR for your 2023 Nissan Frontier. This brake controller is reliable while looking good in the cab of your vehicle. The main unit installs behind the dash so only the control knob is visible. The knob…

view full answer...

Answer 12

Thanks for writing in Steve. For the 2023 Nissan Frontier I recommend our etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98869. The weight capacity of this hitch is 500 pound tongue weight, and a 5,000 pound…

view full answer...

Will The Lomax Tonneau Cover # LOM65QR Work With A TruXedo Elevate Ladder Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching