Dually Wheel for Trailer that Has 8 on 6-1/2 inch Bolt Pattern

Question

Question:

These are the wheels we use at this time got them from you . But would like to start using duals on each axle

asked by: James G

0

Expert Reply:

Hey James, so the only wheel size we have in the bolt pattern you have that is a dually setup is the Vesper part # MX89FR which is a 16 inch diameter wheel. Everything that is dually setup in the 17.5 inch diameter has the larger bolt patterns.

expert reply by: Jameson C

0

Answer 1

Hi John; I don't know exactly what is on your 2014 Thor Freedom Elite 28H but the Vesper Steel Dual Trailer Wheel #MX89FR matches everything you gave me. The only thing you would need to do is check the offset and see if it matches at…

view full answer...

Answer 2

It is possible that the Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.88" Pilot - Silver #MX89FR will work on your 2013 Itasca 25B built on the Ford E-350 chassis, but you will need to confirm the bolt pattern of your…

view full answer...

Answer 3

It is possible that the Vesper Steel Dual Trailer Wheel - 16" x 6" item #MX89FR will work on your 2022 Jayco Entegra Odyssey 31F since it is on the E450 Ford chassis. It is however a trailer wheel. You will need to confirm the bolt pattern…

view full answer...

Answer 4

The Vesper Steel Dual Trailer Wheel #MX89FR could possibly fit your 22GN BIGTEX 10K axle but we don't have a way to verify it for you. If your trailer has a dually wheel setup and the current wheel size is 16 inch in diameter, has a 8 on 6-1/2…

view full answer...

Answer 5

Yes, if the bolt pattern on the Vesper Steel Dual Trailer Wheel #MX89FR and you have the same 5.35" offset, then this will work just fine. Typically, vehicle's will use wheels with a high positive offset which will put the tire closer to the…

view full answer...

Answer 6

We do have the wheel you will need for a spare that fits both the front and rear duallys. It is the Vesper Steel Dual Trailer Wheel item #MX89FR. This wheel is 16" x 6" has an 8 on 6-1/2 lug pattern and fits a 4.88" pilot hole. We do…

view full answer...

Answer 7

It is possible the Dexstar Dual Wheel with Offset #AM20783 you looked at will fit but we don't have specific wheel information to confirm it. You would need to compare the size, bolt pattern, offset, and pilot diameter to see if it matches. This…

view full answer...

Answer 8

Hello Jeremy. We do have the Dexstar Dual Wheel with Offset #AM20783 which is a 16" wheel with a 5.5" offset and the 8 on 6-1/2" bolt pattern just like the 8C2Z-1015-G wheel. The #AM20783 wheel has a 4.75" pilot hole. I did not…

view full answer...

Answer 9

Yes, a 225/75R16 load range E tire like your Hankook LT225/75R16 will definitely fit the 16" x 6" wheel you mentioned, which is the following part number: - Vesper Steel Dual Trailer Wheel #MX89FR

view full answer...

Answer 10

Hello Martín, Yes it is; I can verify for you the 4.88" pilot diameter is the real pilot diameter of the Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 #MX89FR.

view full answer...

Answer 11

It sounds like you're needing the Vesper Steel 16" wheel. This comes with a 4.77" Pilot Hole as part #TA56FR or a 4.88" Pilot Hole as part #MX89FR. These have a 16" diameter and a 6" width which will fit just fine for…

view full answer...

Answer 12

It sounds like you need Vesper Steel Dual Trailer Wheel - 16" x 6" - 8 on 6-1/2 - 4.77" Pilot - Silver #TA56FR. This matches your wheel diameter of 16" and has a 4.77" pilot diameter and is 8 on 6-1/2" like you need.…

view full answer...

Dually Wheel for Trailer that Has 8 on 6-1/2 inch Bolt Pattern

Product Page this Question was Asked From

Continue Researching