Clevis Inner Diameter for the Demco Tow Bar Adapter for Blue Ox Base Plates

Question

Question:

What is the shaft size on tow at end. I was wanting to see if the DM9523041 was for a 1-3/8” diameter shaft. I have the demco Excalibur bar. Thanks

asked by: Rick L

0

Demco ExcaliBar
(click to enlarge)

Expert Reply:

Rick, according to Blue Ox the space between the bolt holes at the end of the Demco Tow Bar Adapter for Blue Ox Base Plates # DM9523041 is 1.63" ( 1 5/8") so it'd be a quarter inch larger, and should work fine for you.

expert reply by: Bryce D

0

Clevis End Spacing
(click to enlarge)

Answer 1

Yes, there are adapters that will allow a Blue Ox tow bar to connect to a Demco base plate kit. For that you'd need the part #DM9523034 for if the base plate was a classic or a part #DM9523127 for if it's a tabless like the part #DM9519291…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hi Brian, To flat tow your 2026 Ford Ranger XLT with your Blue Ox Avail Tow Bar, you'll need: - Blue Ox Base Plate Kit w/Removable Arms part #BLU77ER, this will require some minor drilling, and the tow hooks must be removed and remain off the…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Clevis Inner Diameter for the Demco Tow Bar Adapter for Blue Ox Base Plates

Product Page this Question was Asked From

Continue Researching