How To Replace Kuat Lock Cores

Question

Question:

I have lost the key to my cables do I need to replace the cables or can I replace them with just a new lock mechanism. Watching the video it looks like I have to have the key to take the lock mechanism out. Please advise.:

asked by: Nathan S

0

Expert Reply:

Hi Nathan,

In order to easily remove the lock core you would need to have the correct key to unlock it. If you know your lock code then you can order a replacement key directly from Kuat. If you don't know your lock code then you can carefully drill out the center of the lock to loosen it enough to pull out and then replace with new lock cores # LOCO6.

expert reply by: Kevin C

0

Answer 1

Hey Jay, thanks for reaching out. We can provide another Kuat hitch lock part #HL2 but we cannot guarantee a specific kay code with these since we don't offer a keyed-alike option. if you need a specific key code, I'd suggest reaching out…

view full answer...

Answer 2

The Hitch Lock for Kuat Bike Racks #HL2 will allow you to lock your Kuat Transfer V2 Bike Rack #KU84FR with the 2" hitch shank to your receiver. Thus securing your Kuat Rack to the etrailer Trailer Hitch Receiver #e98848 that you have on your…

view full answer...

Answer 3

The Kuat Transfer V2 2-Bike Rack #KU84FR is an excellent bike rack that is compatible with motorhomes, RV's, and travel trailers. This has a weight capacity of 60lbs per bike and can hold up to 3" wide tires; for fat bikes use Fat Bike…

view full answer...

Answer 4

Rabecca, to replace your hitch lock on your Kuat NV Base 2.0 you can use the Hitch Lock for Kuat Bike Racks #HL2, and to replace the other 3 lock cores you can use the Replacement Lock Cores for Kuat Cargo Carriers and Bike Racks #LOCO4. To replace…

view full answer...

Answer 5

The Kuat Hi Lo adapter part #HL20B has a threaded hitch pin design where it installs into the vehicle hitch, so a Kuat hitch lock like the part #HLT would securely lock the adapter to the vehicle hitch.

view full answer...

Answer 6

There is an option for a hitch lock for the original (manufactured before 2021) Kuat Transfer bike rack that you can use other than the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks #HLT. The other option is a cable and hitch lock combination,…

view full answer...

Answer 7

Hey Ronald, thanks for reaching out! I recommend installing the etrailer Trailer Hitch Receiver #e98856 on your 2017 Jeep Wrangler to carry the Benton Shifts&Grins Bike Rack #B54FR. We actually had a teammate fit the rack and bikes on their 2017…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi Eric, Thanks for your question. As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the #C96CR will work as a replacement. Of note, the #C96CR will more than likely mount up a bit differently than your factory…

view full answer...

Answer 12

Hi Dennis! The Hellwig Load Pro 35 Heavy Duty Helper Springs with Custom Mounting Kit - Above Axle #HE93XR can potentially raise an unloaded truck a little, but it's going to be very minimal and will really only happen if your suspension is…

view full answer...

How To Replace Kuat Lock Cores

Product Page this Question was Asked From

Continue Researching