Replacement Wheel Stud and Electric Brakes for Tandem Axle Dump Trailer With 7k Axles

Updated 03/01/2024 | Published 02/29/2024

Products Featured in This Question

Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1

(113)

$10.39

etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K

(3184)

$183.57

Mounting Bolts and Hardware for 12" Brake Assemblies

(230)

$39.10

Question:

Hi, etrailer folks, I need a replacement stud and lug nut for my trailer. It’s a b wise, 16’ dump, tandem 7K SS axles, 8 lug on 6.5” I think?. Not sure if those are Dexter axles. Oh, and electric brakes. Is that enough to go on? Many thanks!

asked by: John W

Expert Reply:

There is no way to determine the correct replacement studs without more information. It could be 1/2", 9/16", or 5/8" so you will need to measure. I have attached a link below to all of our replacement wheel studs so you can choose the right one once you have your measurement.

Assuming this is a modern trailer with a standard 7k axle you can use the etrailer Electric Trailer Brakes # AKEBRK-7-SA. These 12" x 2" brake assemblies fit a 5 bolt brake flange pattern. They are self-adjusting so you don't have to worry about periodic manual adjustments. If you also need replacement hardware you can use the # BRKH12.

expert reply by: Robin H