Can Spare Tire Stay on 2022 Dodge Durango Using Draw-Tite Hitch DT38MR

Question

Question:

Spare 245/65 R18 on my 2022 Durango R/T plus awd. Will this fit without leaving my spare off?

asked by: Roland

0

Expert Reply:

Hey Roland, good question and the answer is you can leave your 18 inch spare tire on your 2022 Dodge Durango and still install the Draw-Tite Max-Frame Trailer Hitch Receiver # DT38MR.

expert reply by: Kyle S

0

Answer 1

The Draw-Tite Class III Max Frame Receiver Hitch part #DT38MR does require the removal of a 20" spare tire. The hitch is designed to fit with a stowed 18" tire but not 20" so it will not be able to remain stowed under the vehicle.…

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2" #DT38MR will fit models with an 18" or smaller spare tire that is stored under vehicle. With that being said, if your spare tire is larger than this, it will not be…

view full answer...

Answer 3

All of the hitches we offer for your 2020 Dodge Durango like the Draw Tite part #DT38MR do not fit with spare sizes that are larger than 18 inches. Now if what you have truly is smaller in overall diameter than a standard tire size that fits your…

view full answer...

Answer 4

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT38MR which is a fit for your 2015 Dodge Durango is designed to work with a factory full size spare tire that has a steel wheel which I have attached a photo of for you. If you have a steel wheel…

view full answer...

Answer 5

Yes, there is plenty of room between the Draw-Tite Hitch #DT38MR and the spare tire on the 2019 Dodge Durango. The stock spare is an 18 inch wheel and you will have no problems. I've included a picture to show you and also included the install…

view full answer...

Answer 6

All hitches offered for your 2017 Dodge Durango, including the Draw-Tite #DT38MR with concealed cross tube, are compatible with the 18-inch spare but not the 20-inch. If you refer to the linked photo showing an 18-inch spare in place along with…

view full answer...

Answer 7

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT38MR for the 2020 Dodge Durango that allows the knock out panel to be replaced when the hitch is not in use. I have attached an installation video on a 2019 Dodge Durango but the…

view full answer...

Answer 8

Yes the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK22113 you were looking at is exactly what you need to add a 7-way connector and a trailer brake controller to your 2017 Dodge Durange without the factory tow…

view full answer...

Answer 9

The most hidden hitch for your 2021 Jeep Grand Cherokee Limited that allows a full size 18 inch spare to be stored underneath it is the Draw Tite part #DT38MR which puts the hitch opening behind the rear fascia panel for a totally hidden look when…

view full answer...

Answer 10

Yes, the Draw-Tite trailer htich receiver, part #DT38MR, does fit completely behind the fascia cut out in the bumper of your 2014 Dodge Durango. The factory cover can be put back in place after the hitch is instaslled. Look at the two pictures…

view full answer...

Answer 11

For a 2017 Dodge Durango, since you have an 18 inch wheel you can use any of the trailer hitches to fit. Most of these vehicles will have an 18 inch wheel for a spare. Since your Durango does come with 20 inch wheels, a full-size spare would be one…

view full answer...

Answer 12

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR will fit your 2015 Dodge Durango with an 18" or smaller spare tire. The class IV receiver is capable of supporting up to 1,125lbs of tongue weight and towing 7,500lbs. With a weight…

view full answer...

Can Spare Tire Stay on 2022 Dodge Durango Using Draw-Tite Hitch DT38MR

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching