Does Draw-Tite Trailer Hitch Receiver Fit Behind Bumper Fascia of 2014 Dodge Durango

Question

Question:

Hi folks! Looking for confirmation that this hitch # DT38MR fits completely behind the existing bumper fascia without having to purchase a separate bubbled out bezel. Thanks in advance!

asked by: Chris

0

Expert Reply:

Yes, the Draw-Tite trailer htich receiver, part # DT38MR, does fit completely behind the fascia cut out in the bumper of your 2014 Dodge Durango. The factory cover can be put back in place after the hitch is instaslled. Look at the two pictures I've attached when we installed the hitch on a Durango.

expert reply by: Charles S

0

click to enlarge

Answer 1

I would be happy to help you set your 2022 Dodge Durango up to tow your cargo trailer. I have linked all necessary parts below along with any pictures and installation videos we have that will help you install them. For a hitch, I recommend the…

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver part #DT38MR which is a fit for your 2015 Dodge Durango is designed to work with a factory full size spare tire that has a steel wheel which I have attached a photo of for you. If you have a steel wheel…

view full answer...

Answer 3

All of the hitches we offer for your 2020 Dodge Durango like the Draw Tite part #DT38MR do not fit with spare sizes that are larger than 18 inches. Now if what you have truly is smaller in overall diameter than a standard tire size that fits your…

view full answer...

Answer 4

The most hidden hitch for your 2021 Jeep Grand Cherokee Limited that allows a full size 18 inch spare to be stored underneath it is the Draw Tite part #DT38MR which puts the hitch opening behind the rear fascia panel for a totally hidden look when…

view full answer...

Answer 5

Yes, there is plenty of room between the Draw-Tite Hitch #DT38MR and the spare tire on the 2019 Dodge Durango. The stock spare is an 18 inch wheel and you will have no problems. I've included a picture to show you and also included the install…

view full answer...

Answer 6

Hey Roland, good question and the answer is you can leave your 18 inch spare tire on your 2022 Dodge Durango and still install the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR.

view full answer...

Answer 7

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV- 2" #DT38MR will fit models with an 18" or smaller spare tire that is stored under vehicle. With that being said, if your spare tire is larger than this, it will not be…

view full answer...

Answer 8

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR will fit your 2015 Dodge Durango with an 18" or smaller spare tire. The class IV receiver is capable of supporting up to 1,125lbs of tongue weight and towing 7,500lbs. With a weight…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR for your 2015 Dodge Durango R/T is a great option. The safety chain connections are made behind the bumper, so they will go underneath. Some models like the photo you see can remain untrimmed and…

view full answer...

Answer 10

For a 2017 Dodge Durango, since you have an 18 inch wheel you can use any of the trailer hitches to fit. Most of these vehicles will have an 18 inch wheel for a spare. Since your Durango does come with 20 inch wheels, a full-size spare would be one…

view full answer...

Answer 11

The Draw-Tite Class III Max Frame Receiver Hitch part #DT38MR does require the removal of a 20" spare tire. The hitch is designed to fit with a stowed 18" tire but not 20" so it will not be able to remain stowed under the vehicle.…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Does Draw-Tite Trailer Hitch Receiver Fit Behind Bumper Fascia of 2014 Dodge Durango

Continue Researching