Will the Draw-Tite Max-Frame Trailer Hitch Receiver Fit a 2015 Dodge Durango with Full Size Spare

Question

Question:

Will this hitch fit with the 20inch spare tire underneath

asked by: Valentin

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver part # DT38MR which is a fit for your 2015 Dodge Durango is designed to work with a factory full size spare tire that has a steel wheel which I have attached a photo of for you. If you have a steel wheel then yes the hitch will fit but if you have an alloy wheel like what is on the vehicle then the hitch will not fit.

If you can send me a photo of your spare tire I would be happy to confirm this for you.

expert reply by: Conner L

0

click to enlarge

Answer 1

This bracket fits a very specific type of 7 and 4-way so I'd have to see what your OEM plug looks like. Does it look like the picture I attached?

view full answer...

Answer 2

The most hidden trailer hitch available for your 2020 Dodge Durango is without a doubt the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR. The 2" receiver for this Class III hitch will actually extend out through the bottom of the rear…

view full answer...

Answer 3

Starting with the trailer hitch I recommend the Draw-Tite Class III Max Frame Receiver Hitch #DT38MR because of its hidden design. This is the only hitch available for your 2018 Dodge Durango that will actually sit behind the rear bumper fascia panel…

view full answer...

Answer 4

Absolutely! For your 2021 Dodge Durango we have the Draw-Tite Trailer Hitch #DT38MR which installs in a manner making it able to be completely invisible by reinstalling the small cover on the center of your bumper. This hitch has a massive 900lb…

view full answer...

Answer 5

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT38MR for the 2020 Dodge Durango that allows the knock out panel to be replaced when the hitch is not in use. I have attached an installation video on a 2019 Dodge Durango but the…

view full answer...

Answer 6

All hitches offered for your 2017 Dodge Durango, including the Draw-Tite #DT38MR with concealed cross tube, are compatible with the 18-inch spare but not the 20-inch. If you refer to the linked photo showing an 18-inch spare in place along with…

view full answer...

Answer 7

For a 2017 Dodge Durango, since you have an 18 inch wheel you can use any of the trailer hitches to fit. Most of these vehicles will have an 18 inch wheel for a spare. Since your Durango does come with 20 inch wheels, a full-size spare would be one…

view full answer...

Answer 8

Yes, there is plenty of room between the Draw-Tite Hitch #DT38MR and the spare tire on the 2019 Dodge Durango. The stock spare is an 18 inch wheel and you will have no problems. I've included a picture to show you and also included the install…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR for your 2015 Dodge Durango R/T is a great option. The safety chain connections are made behind the bumper, so they will go underneath. Some models like the photo you see can remain untrimmed and…

view full answer...

Answer 10

The most hidden hitch for your 2021 Jeep Grand Cherokee Limited that allows a full size 18 inch spare to be stored underneath it is the Draw Tite part #DT38MR which puts the hitch opening behind the rear fascia panel for a totally hidden look when…

view full answer...

Answer 11

Hey Roland, good question and the answer is you can leave your 18 inch spare tire on your 2022 Dodge Durango and still install the Draw-Tite Max-Frame Trailer Hitch Receiver #DT38MR.

view full answer...

Answer 12

Yes, the Draw-Tite trailer htich receiver, part #DT38MR, does fit completely behind the fascia cut out in the bumper of your 2014 Dodge Durango. The factory cover can be put back in place after the hitch is instaslled. Look at the two pictures…

view full answer...

Will the Draw-Tite Max-Frame Trailer Hitch Receiver Fit a 2015 Dodge Durango with Full Size Spare

Continue Researching