Does The Pace Edwards Switchblade Fit A 2023 Ram 3500 With Ram Boxes

Question

Question:

Will this fit a 2023 Ram 3500 with ram boxes? And if so can this stop to close halfway or so?

asked by: Joseph

0

Expert Reply:

Hi Joseph,

The Pace Edwards Switchblade # PE46QJ unfortunately will not work with the Ram Boxes but Pace does have the JackRabbit # 311-M-JRD87A08 and BedLocker # 311-M-BLD87A08 as compatible fits. The JackRabbit has built-in stops every 12" so that you can lock the cover partially open. The BedLocker has an electro-magnetic brake that can stop and lock the cover at any point along the rails.

expert reply by: Kevin C

0

Answer 1

There is a retractable tonneau cover for your 2020 Ram 2500 with a 6-1/2 foot bed, Ram Box and Cargo Management System that will allow you to keep the rails on your truck and not have to remove them. The rails will be used as a way to install the…

view full answer...

Answer 2

Hi KC, Yes, the Pace Edwards JackRabbit Retractable Hard Tonneau Cover #311-JRD87A08 will fit your 2020 Ram 2500 6’4 bed with Ram Boxes and black open cargo rails. I went ahead and checked with Pace Edwards for you to verify this.

view full answer...

Answer 3

Hey Scott, we do carry retractable tonneau covers that fit your 2019 Ram 2500 with Ram Boxes. For a manual retract we have the Pace Edwards JackRabbit part #311-M-JRD87A08 or for a power retract we have the part #311-BLD87A08 which are both really…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 11

Hey Tim, the Brandmotion FullVUE Digital Rear View Mirror with HD Backup Camera #BM86YR that you referenced does come with a camera in the third brake light/CHMSL location that you asked about. I attached a picture that shows the contents of the kit…

view full answer...

Answer 12

Hello Travis, Thanks for writing in! Your father-in-law's Demco Autoslide 5th Wheel Trailer Hitch for Dodge Ram - Single Jaw - Above Bed - 18,000 lbs #DM59XV is built to mount to industry-standard above-bed rails, so it won't drop right into…

view full answer...

Does The Pace Edwards Switchblade Fit A 2023 Ram 3500 With Ram Boxes

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching