Can The Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout # DX43FR Be Bolted On?

Question

Question:

Does this have to be welded on or could it be bolted on to the tongue of the trailer?

asked by: Brian

0

Expert Reply:

The Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout # DX43FR is designed to be welded on as the outer member is only primed. Once welded you can paint the outer member and the tongue. We do have similar units like the # DX56FR which are predrilled and zinc coated for superior corrosion resistance. This is a much better option if you are able to bolt the coupler to your existing 3" wide trailer tongue.

expert reply by: Bud M

0

Answer 1

Hey Darrel, to bleed the Dexter Zinc-Plated Brake Actuator #T43397007K that you referenced you would need to use a 2x4 and the safety chains to push on the coupler of the actuator to pressurize it. See attached picture and also the attached help…

view full answer...

Answer 2

Hey Stephen, this is a great question but I don't have a great answer. Both of our part numbers #DX69FR and #DX43FR represent the same exact Dexter DX7.5L A-60XL Surge Brake Actuator. I am not sure why we have two part numbers for the same thing…

view full answer...

Answer 3

Good question, and there is just one difference between the Dexter disc brake actuators you asked about, which is the overall length: - 17-1/2" Overall length: Dexter DX7.5L A-60 Brake Actuator #DX63FR - 19" Overall length: Dexter DX7.5L…

view full answer...

Answer 4

The Dexter DX7.5L A-60 brake actuating coupler, part #DX89FR would be a direct replacement for the Dexter 34044 Disc Brake coupler you mentioned.

view full answer...

Answer 5

If you already have the housing welded on, you do not need the #DX63FR Dexter DX7.5L A-60 Brake Actuator w Electric Lockout. What you are looking for is the inner member. The #DX39FR Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle…

view full answer...

Answer 6

Hey John, since you have a UFP A-60 surge coupler we have just the inner member with the part #DX39FR or if you want the entire replacement coupler/actuator you'd instead want the part #DX63FR. Both of these are designed for 2 inch hitch balls as…

view full answer...

Answer 7

Hey Scott. You can send any pictures you have directly to the email address you receive this response from. We do not have any replacement parts for a TieDown Engineering LP7000 brake actuator but we do have a couple of replacement options. To…

view full answer...

Answer 8

Hey Richard, I don't have a way to look up what actuator your trailer might have came with so I would need you to get me the brand of the actuator and any other identifying info you can from it. Is the trailer disc or drum brakes? A picture of…

view full answer...

Answer 9

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

view full answer...

Answer 10

Hey Keith do you have any part numbers off of that actuator? Also how does yours attach to your trailer's tongue? The Dexter DX7.5L A-60XL Surge Brake Actuator item #DX69FR, you were looking at is for disc brakes. This one welds to a 3" wide…

view full answer...

Answer 11

Hey Dan! The only difference is that sleeve you referenced on the #DX89FR. The #DX99FR is actually part of the #DX89FR and acts as a replacement inner member. Are you asking because of the difference in cost? I'm not sure what our pricing model…

view full answer...

Answer 12

I would be happy to! Other then what you pointed out, the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout item #DX63FR fits a 3" x 3" or 3" x 4" straight tongue. The Dexter item #DX93FR fits a 3" x 5" straight…

view full answer...

Can The Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout # DX43FR Be Bolted On?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching