Looking To Repair Or Replace Actuator On 1998 Ranger Boat Trailer

Updated 07/14/2025 | Published 07/11/2025

Question:

I have a 1998 ranger boat trailer I need to rebuild or replace the surge brake actuator and parts. Or a new one that will fit into my welded on bracket.

asked by: Eric H

Expert Reply:

Hello Eric, thanks for reaching out. We do carry replacement surge brake actuators, and even some replacement parts for certain models. I do not have a way to know exactly what actuator is currently on your trailer though.

If you are looking for replacement parts to try to service your actuator, I will need to know the model number since some parts are brand and model specific. Also let me know what parts you are needing.

If you want to replace the whole thing, which is what I recommend, I will need a few pieces of into from you. Let me know the dimensions of your trailer tongue and the coupler ball size. Also let me know if your brakes are disc or drum. Does your current actuator drop down on top of the tongue, or does it insert inside the tongue. Let me know and I am happy to get back to you with some recommendations.

expert reply by: Jesse M

Dexter DX7.5L A-60L Surge Brake Actuator w Electric Lockout
(click to enlarge)

Eric H.

7/14/2025

I measure hitch 17”. Disc brakes 2” ball. I was hoping I could just remove my hitch guts replace with new instead of cutting and welding.

Jesse M.

7/14/2025

@EricH that might be possible but replacement parts are brand and model specific so I would need to know exactly what actuator you have. Otherwise yes the old one will need to be cut off and a new unit welded in its place