What is the Hitch Pin Hole Diameter of the Trailer Hitch Reducer and Extender e53YR?

Question

Question:

What is the hole diameter for a locking pin?

asked by: PAC

1

Helpful Expert Reply:

5/8". The Trailer Hitch Reducer and Extender item # e53YR has the standard hitch pin hole size of 5/8".

expert reply by: Jerred H

1

Answer 1

You aren't missing anything whatsoever. Due to the way the Inno Tire Hold Bike Rack for 1 Bike #INH110 mounts, the only thing holding the 2 inch sleeve in your 2-1/2 inch hitch is the safety pin of the Tire Hold. Basically if it were a standard 2…

view full answer...

Answer 2

Hey Walter, The quality of the steel plays a factor here but it also really just comes down to testing. At 351lbs #e53YR isn't going to just collapse but 350lbs might have just been the goal when it was designed so that's all it was tested…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Tom, congrats on the new truck! Typically when we hear that someone has the OEM tow prep package they mean the puck system. This is going to be five circular holes built into the bed of your Ram truck and is by far the best way to attach a 5th…

view full answer...

Answer 7

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Answer 8

Hi Jeff, welcome back and sorry to hear that gave you so much trouble. The Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR will work on your Silverado. This plugs in-line at the back of your 7-way at the rear of the truck. You can either…

view full answer...

Answer 9

Hey Cary, The Brophy In Bed Camper Tie Downs- Extra Clearance #HSAB are compatible with your 20116 Ram 3500 Dually. These extra clearance tie downs are meant for the dually applications so you will have no issues with that. There are also frame…

view full answer...

Answer 10

Great choice Lazaro, these air bags are a confirmed fit for your 2018 Ram 3500 4x4 Dually. Firestone Ride-Rite air bags #F37XV is a complete air suspension kit with on demand compressor and in-cab controller. You'll be able to adjust pressure to…

view full answer...

Answer 11

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

What is the Hitch Pin Hole Diameter of the Trailer Hitch Reducer and Extender e53YR?

Product Page this Question was Asked From

Continue Researching