Install Harness for Installing Redarc Tow Pro Liberty in 2024 Ram 1500

Question

Question:

What install harness do I need to install the Redarc Liberty in my 2024 Ram 1500?

asked by: Annette

0

Expert Reply:

To install the Redarc To Pro Liberty part # RED24FR in your 2024 Ram 1500 all you need is the install harness part # 331-TPH-020 which plugs into the port under your dash.

expert reply by: Jameson C

0

Answer 1

Hey Jess, welcome back. The Timbren Rear Suspension Enhancement System item #TDR1500DS is the correct set for your 2025 Ram 1500 Rebel, however I don't recommend them at all. These are the lowest capacity option we have and they're rated for…

view full answer...

Answer 2

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 3

I would be happy to! You're looking for the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers item #331-TPH-020. This will allow you to install either the Redarc Tow-Pro Elite Brake Controller item #RED44FR or the Tow-Pro…

view full answer...

Answer 4

Hi Steven, Thanks for the purchase and we do have the right harness for your 2025 Ram 1500 and the Redarc Liberty Brake Controller #RED24FR. The correct plug-in harness is the following part: - Redarc Plug-and-Play Wiring Harness #331-TPH-020 You can…

view full answer...

Answer 5

On your 2022 Ram 1500 the brake controller install harness you are looking for is under the dash, to the right of the of the steering column taped to another harness. The install harness part #331-TPH-020 is correct for your truck to install the…

view full answer...

Answer 6

Hi Chandler; you won't find helper springs like the #HE94TR you were looking at for your 2021 Ram 1500. The Ram has a coil spring suspension, not leaf springs, which limits your choices for suspension enhancement. However, I do have a couple…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Install Harness for Installing Redarc Tow Pro Liberty in 2024 Ram 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching