Recommended Hitch and Wiring for 2024 Chevrolet Trailblazer

Question

Question:

I'm looking at adding a hitch to my 2024 Trailblazer. Think I'll end up going with the Draw-Tite but I thought I would see what you recommend. I also need to add a connection for my trailer lights. Thanks for the help.

asked by: Nicolas

0

Expert Reply:

I recommend the same Draw-Tite Trailer Hitch Receiver # DT55GR you were looking at for your 2024 Chevy Trailblazer. This Class III hitch has a bolt-on installation and concealed cross tube for a nice clean look. It has a max gross trailer weight of 3,,500 lbs, max tongue weight of 525 lbs, and comes with a limited lifetime warranty.

For wiring you have a few choices based on your tail lights. If you have LED lights you need the # TK26VR. If you have incandescent lights then you need the # TK39FR instead. Both of these plug into the connection points behind the rear tail lights. If you have the tow package with the Active Towplug located in the rear cargo area then you can use the # TK88VR. All of these will provide you with a 4-way to power your trailer's signal lights.

I went ahead and attached some installation videos below for your reference.

expert reply by: Robin H

0

Answer 1

I reached out to Curt for some clarification on their Receiver #C93VV and they said the receiver physically hits the module for the hands free liftgate. They did not test the fit with this part removed as they said it could cause other components to…

view full answer...

Answer 2

I sure can Maria. I've got all the parts you need but let me start out by recommending a different hitch and telling you why I think you don't want the Curt item #C94UR for your Trailblazer. The Curt item #C94UR is a 1-1/4" hitch. That…

view full answer...

Answer 3

To add a hitch with a 2" receiver to your 2023 Chevy Trailblazer, I recommend the Draw-Tite item #DT55GR. This hitch is custom fit and bolts to your Trailblazer with included hardware. It is a class III hitch with a 2" receiver. I really…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it does! The Curt Hitch item #C93VV has been confirmed to fit the 2024 Chevrolet Trailblazer. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver, that has a 2,000 lbs towing…

view full answer...

Answer 6

Hi Todd; for the T-Connector Vehicle Wiring Harness #C44FR on your 2024 Chevy Blazer EV, you can use use a bracket that attaches to the Curt Trailer Hitch Receiver #C63ZV. Just use bracket #18136 and #C42CR; I have added a link below to a video…

view full answer...

Answer 7

The correct trailer wiring harness for your 2024 Cadillac XT4 is the Curt T-Connector #C44FR.

view full answer...

Answer 8

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 9

Each lamp needs to be grounded either through its mounting studs being in direct contact with the trailer frame or by having a jumper wire ran from the lamp to the trailer frame. Ground the trailer connector at the front of the trailer, which will…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Recommended Hitch and Wiring for 2024 Chevrolet Trailblazer

Featured Help Information

Miscellaneous Media

Continue Researching