Trailer Wiring Recommendation for 2024 Hyundai Palisade

Question

Question:

What is the bestest trailer wiring kit that fits my 2024 Hyunda Palisade?

asked by: Cedric

0

Expert Reply:

For trailer wiring that fits your 2024 Hyundai Palisade you'd want the Curt kit part # C43FV for a 4-way or the part # TK64CR for a 7-way. Both of these kits are custom fit so they do not require hardwiring and they have reliable converter boxes.

expert reply by: Jameson C

0

Answer 1

To install a 7-Way harness on your 2024 Hyundai Palisade you will need two separate wiring harnesses because they don't make just one that provides a 7-way. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item…

view full answer...

Answer 2

For a complete setup to tow a trailer with brakes you will need a hitch, 7-way wiring, a ball mount, and the brake controller. I recommend the following for your 2024 Hyundai Palisade: -etrailer Trailer Hitch Receiver - Custom Fit - Matte Black…

view full answer...

Answer 3

Yes, there is a plug in harness available if you do not have the tow package on your 2024 Hyundai Palisade. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #C43FV. This custom-fit T-connector plugs into your…

view full answer...

Answer 4

Yes, Curt has confirmed that the Curt Trailer Hitch Receiver #C13427 is going to be a compatible fit for the 2024 Hyundai Palisade. For the wiring you'll need the Curt T-Connector Vehicle Wiring Harness #C43FV. This wire harness has easy plug-in…

view full answer...

Answer 5

If you have a 7-way already then you only need the brake controller. There are no aftermarket plug and play wiring harnesses for installation so installing one like the #90195 will require splicing. The only exception would be if they actually used…

view full answer...

Answer 6

Yes, I would be happy to! To add a hitch to your 2024 Hyundai Palisade, I recommend our etrailer item #e95ZR. This hitch is custom fit and bolts to your Hyundai with included hardware. It is a class III hitch with a 2" receiver that has a 5,000…

view full answer...

Answer 7

If the dealer is telling you there isn't a way to safely flat tow a 2024 Hyundai Palisade and that a dolly or trailer is only option that is what you would have to stick with. Older vehicles it was easier to install things like drive shaft…

view full answer...

Answer 8

The factory wiring for both the 2023 and 2024 Hyundai Palisade has been a complicated subject. The pre-wiring you're referring to is not an actual trailer connector. You should have factory wiring and connectors which will allow you to add an OEM…

view full answer...

Answer 9

If you are concerned with the budget our etrailer Trailer Hitch Receiver #e95ZR you found is a great option for your 2024 Hyundai Palisade Calligraphy. If you want the best looking I would go with the Stealth Hitches Hidden Rack Receiver…

view full answer...

Answer 10

We have a couple options on trailer hitches that are confirmed for your 2023 Palisade, which are The Curt #C13427, and the etrailer #e95ZR The two hitches are indeed very similar but each hitch has something the other does not. The Curt Hitch #C13427…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Trailer Wiring Recommendation for 2024 Hyundai Palisade

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching