Does the Curt Hitch C86FV Fit the 2024 Mitsubishi Outlander PHEV?

Question

Question:

Does the Curt C86FV fit a 2024 Mitsubishi Outlander plug in hybrid? I am needing it for my bike rack that I use for e-bikes.

asked by: Brock

0

Expert Reply:

Yes, it does! The Curt Hitch item # C86FV has been confirmed to fit all models of the 2024 Mitsubishi Outlander including the PHEV. This is a class III hitch with a 2" receiver. It has a 200 lbs tongue weight capacity so it will work great with any e-bike bike racks that fit a 2" hitch.

expert reply by: Jerred H

0

Answer 1

Hello T; the installation of the EcoHitch Stealth Trailer Hitch #EH64CR does not require drilling but it does require cutting. You will have to cut out a section from the bumper and exhaust panels, and part of the muffler shield. The rest of the…

view full answer...

Answer 2

Hello Ed, thanks for getting in touch. We do have a hitch for the 2025 Mitsubishi Outlander PHEV, but the etrailer Trailer Hitch Receiver #e59MV will not fit the PHEV models. We have two hitches confirmed to fit the PHEV model, and those are the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 9

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 10

Though the Curt # C13409 and Draw-Tite #76271 are nearly identical to each other, there are a few subtle differences. First being where they sit once installed. The will both have the exact same height of 14-1/2 inches, but the Draw-Tite #76271 will…

view full answer...

Answer 11

Hey David, thanks for reaching out. Yes, the Curt Trailer Hitch Receiver #C82RJ will indeed fit the 2027 Kia Telluride. This hitch is still in the pre-order phase, but it is being going to fit both the 2026 and 2027 Telluride. Right now, we are…

view full answer...

Answer 12

Hey Aaron, great question! The Trailer Mate Trailer Hitch Receiver #TMT67FR is definitely a budget friendly option for a hitch on your 2026 Highlander. This is basically the economy line from Curt. The welds are a little different (but will still do…

view full answer...

Does the Curt Hitch C86FV Fit the 2024 Mitsubishi Outlander PHEV?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching