Availability of a Pipe Style Mount Trailer Jack With a Power Drill Attachment

Question

Question:

Is there a jack like this with a drill attachment?

asked by: Steven

0

Expert Reply:

The Trailer Valet JXS Trailer Jack # TV64FR is the closest we have to the Round, Pipe Mount Swivel Jack # TJP-7001S-B with a power drill attachment. This jack is only rated for up to 5,000lbs versus 7,000lbs like the jack you found. It also has a bolt on connection but has a similar pipe mount which allows you to easily remove and swivel the jack like the one you found.

expert reply by: Bud M

0

Answer 1

I went out to the warehouse to test the Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Sidewind - 10" Travel - 3,000 lbs Item #TJP-5001S-B for you. When cranking the handle the footplate does not spin. Going from cranking the leg from…

view full answer...

Answer 2

There is roughly 1/2" of exposed inner tube on the Round, Pipe Mount Swivel Jack #TJP-5001S-B exposed the bottom of the outer tube. This will give you a length of 9-3/4" from the center of the pipe mount to the bottom of the tube.

view full answer...

Answer 3

Hey Joe, yes the Curt hitch part #C13704 can install on your 2025 NOBO 19.3 based on your frame width and style. Since you have a boxed frame you could weld the hitch on like you mentioned or you could use fish wire/bolt leaders to get hardware in…

view full answer...

Answer 4

Hi Aaron! I believe what you are looking for is included with the Reese Pro Round Bar Replacement Bracket & Frame Hardware Kit - Qty 1 #RP25FR. Unfortunately, that keeper tab piece (called a spring bar cover in the instructions) isn't sold…

view full answer...

Answer 5

Hey Joshua thanks for the question. The only lift kit we used to have for a 3,500 lbs diamond torsion axle is the Single Diamond Torsion Axle LC270682. We have not carried it for over a year though. Lippert's part number for it is 270682.…

view full answer...

Answer 6

We do have a lift kit for your Lippert 7K torsion axle but the Dexter Torflex Lift Kits like part #K71-725-02 are designed to fit specific Dexter torsion axles. For example, the above mentioned kit will only fit a #12 Torflex axle that has a 5,500 -…

view full answer...

Answer 7

Yes. We do have replacement wheel options for an F2 Fulton Dual Track Jack. We have the Replacement Twin-Track Wheel for Fulton F2 Swing-Up Jacks with Dual Wheels, #F500138. This replacement does not come with hardware for installation. You might…

view full answer...

Answer 8

For your 2019 Ram 3500 the factory brake controller plug is located under the dash on the driver's side. If you look directly above the accelerator pedal towards the center console there will be 2 plugs taped together. The 4 pin plug is the brake…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

No worries Lorelei, I'm here to help! Very nice name by the way; I've never met a Lorelei. You probably can't say the same about my name though haha. Anyways, an electric jack is more of an upright only jack, whereas the manual options…

view full answer...

Availability of a Pipe Style Mount Trailer Jack With a Power Drill Attachment

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching