Will The Curt Hitch C38JR Fit A 2024 Volkswagen Toas 4motion AWD

Question

Question:

Does your hitch fit the 2024 VW Taos 4motion all wheel drive?

asked by: Michael J

0

Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C38JR will fit the 2024 Volkswagen Taos 4motion AWD. We have confirmed with the manufacturer that this will indeed fit all models of the 2024 Taos, including the 4motion AWD model.

expert reply by: Jesse M

0

Answer 1

Per Curt, the Curt Trailer Hitch Receiver #C38JR is a compatible fit for all models of the 2022 Volkswagen Taos. You shouldn't have to remove the rear fascia or drill into anything but you'll likely need to trim the underbody panel if it…

view full answer...

Answer 2

It's possible that the bolts of the Curt #C38JR you installed on your 2022 Volkswagen Taos loosened up, so I recommend checking them with a torque wrench to be sure. It's not common at all, so if they are still torqued correctly, send me a…

view full answer...

Answer 3

Yep, we sure do have a trailer hitch that fits your 2024 Volkswagen Taos. I verified the fit directly with the manufacturer for you, and the correct part number is the following: - Curt Trailer Hitch Receiver #C38JR

view full answer...

Answer 4

Thank you for your purchase of the Curt Trailer Hitch Receiver #C38JR for your 2022 Volkswagen Taos! From what I'm seeing in the photo you sent in it looks like the bracket(s) on your hitch got bent a little during shipping. This isn't super…

view full answer...

Answer 5

Certainly; I have added a cutout for you showing the fascia trimming needed on your 2024 Volkswagen Taos to install the Curt hitch that fits. I verified with the manufacturer for you the correct part number is the following: - Curt Trailer Hitch…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Will The Curt Hitch C38JR Fit A 2024 Volkswagen Toas 4motion AWD

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching