Recommended Trailer Hitch For A 2002 Nissan Frontier Crew Cab Long Bed

Question

Question:

I have a 2002 Nissan Frontier Crew Cab Long Bed 73”

asked by: Antonino P

0

Expert Reply:

It sounds like you are looking for a trailer hitch for your 2002 Nissan Frontier Crew Cab Long Bed. For that you will want the Draw-Tite Class 3 Trailer Hitch # 75186.

expert reply by: Jesse M

0

Answer 1

Yes, the Curt Hitch part #13831 that you referenced will fit your 2003 Nissan Frontier King Cab. Since you described your cab as a 2 door with room for a someone behind the seats that would mean you have a King Cab. A Crew Cab would mean you have 4…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

We have a few trailer hitches that will work for your 2003 Nissan Frontier Desert Runner. From my research I found that the Desert runner is a King Cab with a short bed. If your truck is a different model just let me know and I will make…

view full answer...

Answer 6

I was unable to find a diagram of the fuse box online for your 2020 Toyota Highlander but if you look at the lid of the fuse box it will have a diagram explaining where each fuse is and its function. You can use this to find the trailer lighting fuse…

view full answer...

Answer 7

The torque rating for Curt Hitch part #13831 is listed in the installation instructions attached to this page. This number can change if the manufacturer changes hardware or if Nissan were to adjust the frame, so always check the instructions…

view full answer...

Answer 8

To add a standard 4-way wiring harness to your 2002 Nissan Frontier XE, I recommend the Curt T-Connector Vehicle Wiring Harness item #C56FR. This custom-fit T-connector plugs into your Nissan's wiring harness, which is located under the vehicle…

view full answer...

Answer 9

Hello D Ray, thanks for reaching out. Sounds like you are on the right track with the Blue Ox SwayPro #BXW1500. This is made for trailers with a tongue weight between 1,000 and 1,500 lbs. Sounds like your trailer will be right within this range when…

view full answer...

Answer 10

The etrailer Trailer Hitch Receiver part #e98869 which is a fit for a 2012 Nissan Frontier is rated for 5,000 lbs or 8,000 lbs with weight distribution. If the trailer is under 5,000 lbs loaded then you will be fine without weight distribution but if…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Recommended Trailer Hitch For A 2002 Nissan Frontier Crew Cab Long Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching