Dimensions of InfiniteRule Trailer Coupler Lock

Question

Question:

What is the distance between the 1/4" pin and the other side of the lock where it comes apart. I need to know the size of that gap. I would also like to know how long the sides are. Thank you.

asked by: Doc

0

Expert Reply:

The distance between the 1/4" pin and the main lock body on the # IR98FR is 11/16". The length of the sides is 2-1/16".I have attached a diagram below showing all of the measurements for your reference.

expert reply by: Robin H

0

InfiniteRule IR98FR Dimensions.
(click to enlarge)

Answer 1

The inside distance between the pin and the lock on the InfiniteRule Trailer Coupler Lock #IR98FR is 11/16".

view full answer...

Answer 2

Currently the InfiniteRule Trailer Coupler Lock #IR58FR is only offered keyed unique. For a keyed alike option you will want to refer to one of our etrailer Locks #e98886 or #e98889 and select keyed alike from the drop down box when placing your…

view full answer...

Answer 3

Hello Barbara, thanks for reaching out. We are a parts distributor and we do not actually manufacture the InfiniteRule #IR58FR locks. If you need a similar non-stainless lock take a look at the Flint Hill Goods Trailer Coupler Latch Lock #FHG33VR or…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

Not another one! Just kidding Dirk! I was in the Marines I enjoy these conversion questions on the M1101 trailers. I'd be more than happy to list the parts you need, along with quantity, and confirm compatibility. 1 - Timbren Axle-Less Trailer…

view full answer...

Answer 7

Hey, Bill. If you’re not installing a supplemental braking system, like part #DM86VR, then the answer is no, you won’t need to install a charge line kit (part #RM-156-25). You will, however, want to double-check your owner’s manual for the exact…

view full answer...

Answer 8

Based on my research your M1101 trailer has a GVWR of around 3400lbs, so for a replacement axle I recommend taking a look at the Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Off-Road Tires - 3,500 lbs #ASR35HDS01 which will…

view full answer...

Answer 9

Hey Jacob! If your 2018 Jeep Wrangler Unlimited came with that 4-way connector from the factory, all you'll need is the Hopkins Endurance Quick-Install 7-Way Trailer Connector item #HM42190. This one plugs directly into your Jeep's factory…

view full answer...

Dimensions of InfiniteRule Trailer Coupler Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching