Can I Install the MaxxAir II RV and Trailer Roof Vent Cover item # MA86JR w/out Drilling?

Question

Question:

Hi. I have a Keystone Outback Ultra-lite 292URL. I’m having trouble finding information that confirms its compatibility with the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black. Would you happen to know if I can use this item without drilling? I don’t know the brand of my roof vent fan, but it’s not MaxxAir. Thanks!

asked by: Anthony P

0

Expert Reply:

Since you know you do not have a MaxxAir fan you will have to drill to install the MaxxAir II RV and Trailer Roof Vent Cover item # MA86JR. The EZClip pins only attach to their vents. As far as compatibility goes so long as your roof vent is 14" x 14" this cover will work.

As far as identifying what fan you have I don't have anyway of knowing that information. You can look for a part number and try to identify it that way, check your owner's manual, or contact Keystone directly. We do have multiple other options for covers that work with different size roof vents. If you would like to email me back the dimensions of yours I would be happy to find you a cover that will work.

expert reply by: Jerred H

0

Answer 1

There are some moving pieces on this since steps come in different heights/lengths, but the Camco RV Screen Door Cross Bar - 20-3/4" to 28-5/8" Long - Aluminum - Black #CAM42188 will only stick out around 2" from the inside of the…

view full answer...

Answer 2

The Replacement Step Latch #MR97BR can only be used on the left side of a MORryde Step Above step.

view full answer...

Answer 3

In regards to the Replacement Step Latch for MORryde Step Above RV Steps part #MR97BR, the latch fits on the left-side only. The latch assembly doesn't work on the rights side of steps due to the angle of the latch. A latch to fit on the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 7

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Can I Install the MaxxAir II RV and Trailer Roof Vent Cover item # MA86JR w/out Drilling?

Product Page this Question was Asked From

Continue Researching