Can the Camco RV Screen Door Cross Bar Be Used with SolidStep Fold Up Steps
Updated 09/19/2021 | Published 09/18/2021 >
Products Featured in This Question
Question:
Do these handles work with fold up steps like MorRyde or SolidStep?
asked by: Peter
Expert Reply:
There are some moving pieces on this since steps come in different heights/lengths, but the Camco RV Screen Door Cross Bar - 20-3/4" to 28-5/8" Long - Aluminum - Black # CAM42188 will only stick out around 2" from the inside of the screen door, and it can be mounted at pretty much any height. This allows you to keep it out of the way of most fold up steps, but it's much easier if you've got a 2 step assembly like the SolidStep Manual Fold-Down Steps for 24" Wide RV Door Frames - Double - Aluminum # LC713662. If you've got a 4 step assembly like the SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames - Quad - Aluminum # LC791574 it's going to be a bit tougher.
You'll want to determine how high your steps go up your screen door and determine if it's still an acceptable height to mount the Camco # CAM42188.
Continue Researching
- Search Results: 2~5/16 hitch ball
- Video: All About the 1-7/8" 12pt Thin Walled Socket
- Video: Ultimate Overview of the Replacement Socket for Equal-i-zer Weight Distribution Systems
- Video: The Low-Down on the 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems
- Q&A: What Equalizers and Shackle Strap Kit Would be a Great Upgrade for My 2021 Heartland Torque T26?
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 16,000 lbs
- Shop: 1-7/8" 12pt Shallow Socket - 3/4" Drive - Chromium-Vanadium Steel
- Shop: Replacement Socket for Equal-i-zer Weight Distribution Systems - 10,000 lbs GTW
- Shop: Replacement Spacer Rivet and Washers for Equal-i-zer Weight Distribution Head
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 14,000 lbs
- Video: Thin Walled Socket for Equal-i-zer Hitches: The Breakdown
- Q&A: What Size Hitch Ball Can The Equalizer Weight Distribution System Work With
- Video: All About the Replacement Head for Equal-i-zer Weight Distribution Systems
- Shop: 2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Q&A: How to Properly Set up Weight Distribution With Air Bag Equipped 2017 Ram 2500
- Video: In-Depth Review of the Camco RV Screen Door Cross Bar
- Q&A: How is Width of Camco RV Adjustable Screen Door Push Bar Measured
- Q&A: Can Push Bar Be Installed on RV Screen Door with SolidStep in Stowed Position
- Q&A: Replacement Equalizer Weight Distribution Spring Bars to Increase Capacity
- Q&A: Solid Step Fold-Down Steps for RV Compatibility with Screen Door Bar