Replacement Fan Blade for Ventline RV Vent V2062

Question

Question:

I am looking for a propeller for the motor on a Ventline exhaust fan, Model No. V2062.

asked by: Ken O

0

Expert Reply:

For a replacement fan blade for the V2062 you would want the part # BVA0312-00.

expert reply by: Jameson C

0

Answer 1

Your Philips model V2062 is the same as the Ventline V2062 as Ventline was a division of Philips before they were bought by Dexter. We do have the Replacement 110-Volt AC Fan Motor #BCD0314-00 and Blade #BVA0312-00 that will fit your fan.

view full answer...

Answer 2

The correct replacement motor for your fan is the 110-Volt AC Fan Motor #BCD0314-00 which is 100 CFM capacity.

view full answer...

Answer 3

Thank you for the photos of your bathroom vent fan and the tub/shower faucet! They were both very helpful in finding correct replacement parts for you. I passed the photos of the bathroom vent fan on to my contact at Ventline, and he was able to…

view full answer...

Answer 4

The correct motor and fan blade assembly for a Ventline Exhaust Vent Fan V2062 is part #BCD0314-00 for the motor and part #BVA0311-02 for the blade assembly.

view full answer...

Answer 5

For a replacement motor for your Ventline V2062 you'd need #BCD0314-00 which also fits as a replacement for the V2262.

view full answer...

Answer 6

It may not be an exact replacement but there's no reason you couldn't make the #BCD0388-00 fit in place of the smaller motor. They both install in the same way so it would be just a matter of possibly having to drill new holes in the…

view full answer...

Answer 7

The correct replacement motor for a Ventline Roof Vent Fan V2062 is the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan part #BCD0314-00. There are no other replacement motor options that will work with this model vent fan. The…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Replacement Fan Blade for Ventline RV Vent V2062

Product Page this Question was Asked From

Continue Researching