Draw Tite 76025 On 2015 Honda Odyssey - What Is The Distance From Hitch Pin Hole To Back Of Bumper?

Question

Question:

I have a 2015 Honda Odyssey. When installed, what is the clearance from the hitch pin to the back of the bumper. I have a bike rack that has a clearance of 6.5 inches from the pin hole to the closest part of the hitch and am wondering if this hitch will allow for enough room.

asked by: Isaac

0

Expert Reply:

With the Draw-Tite Hitch # 76025 installed on a 2015 Honda Odyssey, the distance from the hitch pin hold to the back of the bumper will be 6-3/4". So this will not work with your bike rack.

Instead I recommend going with the etrailer Class 3 Hitch # e98862. Once this is installed, the distance from the hitch pin hole to the back of the bumper will be only 4-1/2". Leaving plenty of room for your bike rack.

I have linked our install video for the etrailer Class 3 Hitch # e98862 below. You will find these measurements around the 2 minute mark, if you want to take a look.

expert reply by: Jesse M

0

Answer 1

Hey Bill, thanks for reaching out! I looked at the instructions for the Thule ReVert Bike Rack #TH73VA, and it does look like they exclude bikes with fenders from their fitments, so we'll need to look at a different solution. And for that, I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Draw Tite 76025 On 2015 Honda Odyssey - What Is The Distance From Hitch Pin Hole To Back Of Bumper?

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching