Differences Between EcoHitch Stealth Trailer Hitch Receivers # EH84GR and X7373

Question

Question:

What is the difference between the 2 ecohitch models for the 2019 model 3? X7373 And EH84GR

asked by: Thomas H

0

Expert Reply:

The EcoHitch Stealth Trailer Hitch Receiver # EH84GR is the EcoHitch part number X7373S which is the stainless steel version of their Receiver X7373. Both will fit your 2019 Tesla Model 3 with the only difference being the materials the receivers are made of. Of course the stainless is made of only stainless steel the other is manufactured from a combination of recycled aluminum, steel and stainless.

expert reply by: Bud M

0

Answer 1

We haven't yet installed the EcoHitch #EH84GR on a 2022 Tesla Model 3 yet, so I can't say for certain what kind of clearance you need, but you can take a measurement on your own and compare it to the #RM-076 high/low adapter to determine if…

view full answer...

Answer 2

Yes, it does! The EcoHitch Stealth Trailer Hitch item #EH84GR has the removable receiver. This hitch installs in an identical way to the Stealth Hitch item #391TES317T. Both of these hitches are confirmed to fit the 2023 Telsa Model 3.

view full answer...

Answer 3

The EcoHitch Stealth Trailer Hitch Receiver part #EH84GR is a confirmed fit for a 2021 Tesla Model 3. It's an excellent bolt-on option with no drilling required. It can be used for towing (if applicable) or other hitch mounted accessories like…

view full answer...

Answer 4

For the 2022 Tesla Model 3 we do have a hitch with the EcoHitch part #EH84GR but the hitch you referenced does not fit as it was designed for older versions of the vehicle.

view full answer...

Answer 5

For your 2018 Tesla Model 3 we have two Stealth hitch options. We have the part #391TES317 which comes with a lower hitch opening that can only be used with a hitch accessory like a bike rack and we also have the part #391TES317T which includes the…

view full answer...

Answer 6

Hey Robert, I looked up the weight of the DK2 Might Multi Frame and it is pretty lightweight at 451 lb. so it would pretty easily be able to be towed with the etrailer hitch #e33ZR. It looks like the coupler height of that trailer is 16 inches and…

view full answer...

Answer 7

Hey Bjorn, We do have a wiring harness for that 2019 Model 3. Along with that hitch, #EH84GR, I recommend the wiring harness #119250KIT. This is going to give you a 4 flat connection at the rear of the vehicle, and better yet it is a plug and play…

view full answer...

Answer 8

The main difference between the etrailer Trailer Hitch Receiver #e33ZR and the EcoHitch Stealth Trailer Hitch Receiver #EH84GR is going to be the brand and the EcoHitch #EH84GR has a removable receiver. Other than that, they boast the same capacities…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Differences Between EcoHitch Stealth Trailer Hitch Receivers # EH84GR and X7373

Product Page this Question was Asked From

Continue Researching