Recommended Engine Block Heater For A 2006 Toyota Tundra 4.7L V8

Question

Question:

Does this fit a 2006 tundra with 4.7L? Description says for V6

asked by: Larry

0

Expert Reply:

The 4.7L 2006 Toyota Tundra should be a V8 and require the Kat's Heaters Custom Engine Block Heater # KH11482. This would be installed in the 2ndRF position on the engine block.

expert reply by: Kevin C

0

Plug Locations
(click to enlarge)

Answer 1

We do carry an engine block heater that is a fit for your 2008 Toyota 4Runner with a 4.7L V8 engine. For that you simply need the following part: - Kat's Heaters Custom Engine Block Heater #KH11482 This is a frost-plug style heater that is simple…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 6

Hey Jon, Most trailer wheel and tire combos - like the Kenda Karrier #KE69JV - do not come pre-balanced. Typically, trailer owners don’t worry about balancing since trailers don’t ride as smoothly as passenger vehicles and you’re not feeling that…

view full answer...

Answer 7

Welcome back Timothy, You're right that you won't see any standalone WiFi battery monitors on our site. All of the battery monitors we carry use Bluetooth, so they're meant for checking your battery when you're close to your RV. If…

view full answer...

Answer 8

Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…

view full answer...

Answer 9

Hi Matt, the easiest way to add a remote on and off control to your Victron MultiPlus-II part #VN73VR is by using the Victron VE.Bus Smart Dongle, part #VN27ZR, which lets you use your phone to turn the inverter on and off, monitor it, and adjust…

view full answer...

Answer 10

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Answer 11

Hey Chris, No, there isn't an upgrade kit for your Generation 1 MORryde StepAbove RV Steps to make them a Generation 2. There is a Replacement Leg for MORryde StepAbove RV Steps - 2nd Generation #MR36DR, but because the Generation 1 steps'…

view full answer...

Recommended Engine Block Heater For A 2006 Toyota Tundra 4.7L V8

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching