Will Bullring Truck Bed Side Wall Anchors for Corner Pockets Fit 2017 Dodge Ram 1500 Lone Star

Question

Question:

This product BU55FR- Will it fit 2017 Dodge Ram 1500 Lone Star? I have 4 oval holes inside the wall truck bed.

asked by: Christopher R

0

Expert Reply:

Yes, the Bullring Truck Bed Side Wall Anchors for Corner Pockets # BU55FR will fit your 2017 Dodge Ram 1500 Lone Star. The only exception is if you have the corner brackets which you can see in the picture below.

expert reply by: Robin H

0

Front Corner Brackets for Bullring Anchor Fitment.
(click to enlarge)

Answer 1

The Buyers Products Kabgard Headache Rack #33785204 that you referenced does normally fit with tool boxes. I attached a picture of a crossover style box installed with the rack. As long as your box does not extend past the top of your bed rails this…

view full answer...

Answer 2

Hi Jeremy; BullRing only has the #BU44FR tie-downs for the front corners. There are none available for the rear. They originally made these for the 2009-2018 models which were able to use them in all four corners. Starting with 2019 they were only…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Jen, thanks for the information! Since your 2016 Ram 2500 has the Ram Boxes, you'll need to have a rotating pin box installed on your 2026 Jayco Eagle HT DDB. The rotating pin box is the only way to tow a 5th wheel trailer and not hit the Ram…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hello Daniel, Thanks for writing in. I am sorry but, no, I would not recommend using the B&W 5th Wheel to Gooseneck Pin Box #BW73RV with a Ram truck equipped with RamBox. The challenge with RamBox trucks is that the bed walls extend farther into…

view full answer...

Answer 11

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 12

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Will Bullring Truck Bed Side Wall Anchors for Corner Pockets Fit 2017 Dodge Ram 1500 Lone Star

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching