To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These retractable tie-down anchors for your truck bed stay out of the way when you don't need them and snap out when you want to haul. They're perfect for trucks that don't have anchors or that only have anchors on the bed floor.
Features:
Specs:
Note: Does not fit trucks with corner brackets.
Whether you have open corner pockets or pop-out caps, it only takes a few seconds to install these BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com, and today we're gonna take a look at these BullRing Retractable Tie-Down Anchors for the inner truck bed corner pockets. Now, these heavy-duty anchors are specially designed to fit the oval holes in the corner side walls of the beds of the 2009 and newer Dodge Ram trucks, and they're gonna give you tie-down points to secure your load, they're gonna work with S-hook and J-hook connections. Now, on the 2009 to 2018 Dodge Ram trucks, these anchors will work in all four corners. However, on the 2019 and newer Dodge Ram trucks, these will only work in the front two corners. And so, if you have a 2019 or newer Ram truck, I am including our item number to the set of two that will work in your front two corners. I do wanna point out that these will not fit trucks with the corner bracket in the front corners, so please check your truck before ordering these to make sure that you don't have that corner bracket.
Now, these retractable anchor rings are very easy to operate once you have them installed, you just simply pull the ring firmly, and that's going to lift out this ring at a 35 degree angle to match the angle of use when securing loads with ratchets or rope, and then when you're done with the ring, all you have to do is punch it down, and it's going to sit flushed with the rest of that anchor when not in use. So that ring will be very easy to pull, you just pull it out firmly, and it's going to pop into place, securing into place, and so, it's not going to accidentally go back down into the body of this anchor, it's gonna stay in this position the entire time that you need it, and then when you don't need it anymore, you just hit it down flushed, and it is out of your way. Now, each anchor is made from stainless steel for a 1,000 pound capacity, and installation is gonna be very simple, so there's not gonna be any drilling, there's not gonna be any special tools, no hassles, and you are going to get four tie-down anchors with this set. It does have a lifetime warranty. This does include a small card here with installation instructions.
And that's gonna conclude our look today, I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..
Ratings & Reviews
Used twice, excellent product worked gr eat
Broke while installing. Screw broke through the plastic. Useless now.
Love the bullrings, you can pull the hooks out and they stay extended or can collapse. Easy to put in. Highly recommend!
Great product. Very easy install. Took less than 15 minutes to install 9 of them, start to finish. Ship time from etrailer was fast and I was kept informed the progress of my order. A+ for this business!
Definitely need to watch the installation video. They were still alittle challenging to install.
Fit was perfect and is very handy having the extra attach points.
Just what I wanted. Fits 2023 Silverado. Take out the screw (nothing flies apart) when installing, keep track of which side goes up and you are good to go. 90 second install
Installation was easy (though a 3rd hand would help)
Haven't had reason to use them yet but they look like they would spread a load over more sheet metal than the OE tie-downs
I can see a use for a straight angle as an option. I frequently keep a strap running between the two points closest to the tailgate just to keep smaller loads from sliding out of reach. Straight loops would not apply a torque to the bedside when loaded that way.
They fit in all four corners of my 2019 Ram Classic with a 5'7" bed.
I had to remove the bed lights to install the ones in the back, but other than that that they are easy to install.
I love all the extra tie down points makes securing loads very easy, i did have slight issue with getting them into the knockouts just a little fudge here and there and in they went overall highly recommended
Ordered the Bullring set for my Silverado 2500 Installation was easy once you removed the screw very happy with them they work great with a cargo net
Very easy to install and high quality product that kind of hides away when you’re not using it.
Great quality- tricky to install but I think that says more about the installer vs the product.
Easy to install, looks and works great.
Excellent quality!
I’ve had these wall anchors on two trucks now, and they are great. They’re easy to install, look good, and super useful.
it seemed like a good idea. They were easy to install, but they barely hang onto any metal. I have had a few pull out when pulled on at certain angles. I do not recommend purchasing these, unless you just like the look of them.
Excellent product. Fits perfectly in my 2021 Ram 1500. Took less than 5mins to install.
Needed some anchors for my web cover and a place to tie down e-bikes up front without crossing over each other. These fit the bill and an added bonus of not having to bend over in the bed to anchor and I can reach the side ones from the ground. Great design and easy install:
Very easy to install. It’s nice that I have more tiedown points. The only thing I think would be better is if they sold them in a 6 quantity. They have 2,4 and 9 packs. You can buy the 2 and 4 but for 10 dollars more you get the 9. I really didn’t want 9, but here we are, I installed all 9.
Nice. Extra tie down hooks. Was a little concern, as the package contained a slip of paper identifying trucks this product would fit. My truck 2024 Chevy 2500hd was not listed. They do fit. Needed to remove clamp screw, then slip body with top of the metal plate going in first then lift up so bottom part of the plate slips in behind truck bed wall. Great addition to the truck if you carrier stuff in the bed of your truck.
Excellent product. These are handy to have. Takes a minute to see how the metal bracket falls into place, but once you see it, the others go in easily.
would highly recommend
Pretty fast shipping and good price
Easy to install and access for tie down. Still going strong.
easy to install. looks great
Do you have a question about this Truck Bed Tie Down?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
3/19/2025
The install looks good! :) ...so you're an extraterrestrial?