Recommended Trailer Hitch for a 2023 Acura RDX

Question

Question:

Will this hitch fit a 2023 Acura RDX

asked by: Maria

0

Expert Reply:

Yes, the etrailer Trailer Hitch Receiver # e72AR will fit your 2023 Acura RDX. This hitch has a maximum GTW of 3,500 lbs, a maximum tongue weight capacity of 350 lbs, and is American made.

expert reply by: Bryce D

0

Answer 1

I recommend our etrailer Trailer Hitch Receiver #e72AR as the best one for your 2024 Acura RDX. This is the one I purchased for my own RDX since it comes with the matte finish and 2" receiver opening. For the 4-way wiring you will need to check…

view full answer...

Answer 2

Yes, we do! To add a hitch to your 2024 Acura RDX, I recommend the etrailer item #e72AR. This hitch is custom fit and bolts to your Acura with included hardware. This is a class III hitch with a 2" receiver that has a 3,500 lbs towing capacity…

view full answer...

Answer 3

I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #76268 for your 2019 Acura RDX. It is a class III, 2" receiver that bolts in place with the 4 included bolts and washers. I have attached a picture of this hitch installed on an RDX that…

view full answer...

Answer 4

I recommend installing the etrailer Trailer Hitch Receiver #e72AR on your 2022 Acura RDX. I personally own a 2020 RDX and we tried to install the new Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT89GR on it but there are no holes for it to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Recommended Trailer Hitch for a 2023 Acura RDX

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching