What Tonneau Cover for a 2024 Ford Maverick Works w/ the Yakima OutPost Ladder Rack?

Question

Question:

Which tonneau cover fits a 2024 Ford Maverick that is compatible with the Yakima OutPost HD Overland ladder?

asked by: Tony

0

Expert Reply:

For a tonneau cover that fits your 2024 Ford Maverick and is compatible with the Yakima OutPost HD Overland Truck Bed Rack item # Y01152-5755 you will need the RetraxONE XR Hard Tonneau Cover item # RTX83QR. This tonneau cover has the built in t-slots that will allow the ladder rack to install directly to.

expert reply by: Jerred H

0

Answer 1

No, that one doesn't but I have one that will. For your 2024 Ford Maverick you will want the Yakima OutPost HD Overland Truck Bed Rack item #Y01152-57. This ladder rack has a 500 lbs capacity and attaches to the inside of the bed using lockable…

view full answer...

Answer 2

Yes, it does Gary! The Blue Ox Base Plate Kit item #BX2914 has been confirmed to fit the 2025 Ford Maverick hybrid. I have linked a installation video below along with the instructions so you can see how to get it set up. If you have any additional…

view full answer...

Answer 3

The dimensions of the canister on the RetraxONE XR Hard Tonneau Cover #RTX83QR are 13-1/2" deep x 12" tall. The canister runs the full length of the inside of the bed on your 2023 Ford Maverick.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hello again, Dan. Thanks for writing in. The Demco Stay IN Play DUO Inline Air Pressure Regulator #DM88UV will not be needed for your 2025 Maverick Hybrid. You can still install one to lessen the braking pressure if it seems too harsh, but it…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

Hey Daniel congrats on the new truck! The Lomax Stance Hard Tonneau Cover item #LOM54RV does indeed fit the 2026 Chevrolet Silverado EV with the Mid Gate. It also works with the Multi-Flex Tailgate that comes on the Trail Boss models. For a…

view full answer...

Answer 10

Hey Don, congrats on the new truck and thanks for all of the information! I recommend the Roadmaster Direct-Connect Base Plate Kit - item #RM87NQ. Roadmaster's baseplate kits and wiring set the standards for flat towing as far as quality and…

view full answer...

Answer 11

Good afternoon Steve and congrats on the new truck! To flat tow a 2026 Ford Maverick Lariat, I recommend the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates item #e47ZR Baseplate Kit - Blue Ox Base…

view full answer...

Answer 12

Hey Daniel, thanks for reaching out. The Demco Stay-IN-Play Duo Braking System #DM86VR will work great on your 2025 Ford Maverick Hybrid. You will not need a brake lite relay to install the braking system. You will need to install a charge line kit…

view full answer...

What Tonneau Cover for a 2024 Ford Maverick Works w/ the Yakima OutPost Ladder Rack?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching