Is the 5K Trailer Valet JXS Trailer Jack item # TV64FR Sold w/out the Mounting Bracket?

Question

Question:

I have the 5x. Can I just get the jack so I can swap out back and forth? or do I need to get the jack and bracket? IE do they sell separately?

asked by: Leonard B

0

Expert Reply:

No, it's not sold separately. The 5K Trailer Valet JXS Trailer Jack item # TV64FR is only available with the mounting bracket.

expert reply by: Jerred H

0

Answer 1

For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4"…

view full answer...

Answer 2

Hey Brian, we do have the replacement handle for the Trailer Valet part #TV64FR with the part #TVXLHC.

view full answer...

Answer 3

A weld-on pipe mount is not included or available for the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option - Side Mount - Sidewind - 2K #TV34FR. There isn't an option to weld on the Trailer Valet jacks, and the only…

view full answer...

Answer 4

The Trailer Valet #TV64FR JXS 5K trailer jack is a pipe mount swivel jack that can be removed from the trailer by pulling the pin shown in the provided photo. If you click the provided link, you can see a video showing a typical installation.

view full answer...

Answer 5

The mounting plate for the Trailer Valet JXS Trailer Jack #TV64FR has bolt holes that are separated on center 5-1/2" horizontally. The vertical mounting holes are separated on center 1" each for a total of 5" from the top hole to the…

view full answer...

Answer 6

The Trailer Valet JXS Trailer Jack part #TV64FR comes with a footplate only. There isn't an exact fit wheel option for this jack but there are likely other options that will work. That said, these wheels reduce the lift/support capacity of the…

view full answer...

Answer 7

Hello Michael, Happy to get the right jack for your SunTracker. I looked up the specs for the weights, the boat itself is about 3,000 pounds, the motor is around 500 pounds, then fuel, gear and batteries around 400 pounds, and the trailer itself is…

view full answer...

Answer 8

I have a solution for you. While we do not have a pre-built weld-on swivel jack with a removable footplate, this can be assembled together with the following pieces: 1) Bulldog Round, Pipe-Mount Swivel Jack, part #BD1541150301. It's a swivel jack…

view full answer...

Answer 9

If you are looking for a jack with a wheel for moving the trailer the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW750D will be the jack that you want to look at, since the Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate…

view full answer...

Answer 10

The foot on the inner tube on Pro Series trailer jack #PS1401480303 is attached, all one part, so you would not be able to add a wheel. None of the pipe-mount swivel jacks come with a wheel. Your best option would be to replace the jack with…

view full answer...

Answer 11

Hi John, No, the Square A-Frame Jack #TJDA-5000S cannot be side mounted but we do have a similar option, with a sidewind handle and footplate, that can be, the Trailer Valet Trailer Jack #TV64FR.

view full answer...

Answer 12

It won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item #BD500190. This is…

view full answer...

Is the 5K Trailer Valet JXS Trailer Jack item # TV64FR Sold w/out the Mounting Bracket?

Product Page this Question was Asked From

Continue Researching