Hi John, No, the Square A-Frame Jack #TJDA-5000S cannot be side mounted but we do have a similar option, with a sidewind handle and footplate, that can be, the Trailer Valet Trailer Jack #TV64FR.
For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4"…
The foot on the inner tube on Pro Series trailer jack #PS1401480303 is attached, all one part, so you would not be able to add a wheel. None of the pipe-mount swivel jacks come with a wheel. Your best option would be to replace the jack with…
I have a solution for you. While we do not have a pre-built weld-on swivel jack with a removable footplate, this can be assembled together with the following pieces: 1) Bulldog Round, Pipe-Mount Swivel Jack, part #BD1541150301. It's a swivel jack…
If you are looking for a jack with a wheel for moving the trailer the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW750D will be the jack that you want to look at, since the Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate…
I have a solution for you, but the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs #BD178203 is not compatible with the Fastway Flip Foot #FA88-00-4500 since the leg and inner tube are a single piece. Instead, you'd…
I have a replacement jack option for you, but I do not recommend cutting off the footplate and drilling a hole in the tube to mount a caster like the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs Item #JC-102 to…
Sure, I'd be happy to help you with that! You'll need part #BD500190, which is a replacement drop leg for the Bulldog #BD500185, #BD500187 and #BD500187.
It won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item #BD500190. This is…
You can use the solar panel charge kit #34272628 with the battery bank of your camper and still charge the batteries with a separate charge source (vehicle alternator, power outlet) but you'll also want the Redarc #331-SBI212D which balances the…
When wiring up the Deka Battery Isolator #DW08771 the main/first battery will connect directly to position one on the isolator without the need for a circuit breaker. The second battery though should be attached to the second position on the isolator…
I would be happy to help! You do not need to change your hubs to upgrade from 14" wheels to 15" wheels, you will just need to make sure your trailer has enough clearance to fit the larger tires that are used on 15" wheels. The Westlake…
Filter Results
