Availability of Replacement Drop Leg for Bulldog BD500188 Powered Trailer Jack

Question

Question:

Can u tell me what the part number is for the replacement drop leg for the BD500188?

asked by: Candace

0

Expert Reply:

Sure, I'd be happy to help you with that! You'll need part # BD500190, which is a replacement drop leg for the Bulldog # BD500185, # BD500187 and # BD500187.

expert reply by: Mike L

0

Answer 1

For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4"…

view full answer...

Answer 2

I have a solution for you, but the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs #BD178203 is not compatible with the Fastway Flip Foot #FA88-00-4500 since the leg and inner tube are a single piece. Instead, you'd…

view full answer...

Answer 3

It won't because the grove in the leg is different enough that they aren't compatible, however I have another option that will. It is the Replacement Drop Leg for Bulldog Round Trailer Jack or Powered Drive Camper Jack item #BD500190. This is…

view full answer...

Answer 4

The foot on the inner tube on Pro Series trailer jack #PS1401480303 is attached, all one part, so you would not be able to add a wheel. None of the pipe-mount swivel jacks come with a wheel. Your best option would be to replace the jack with…

view full answer...

Answer 5

No, it's not sold separately. The 5K Trailer Valet JXS Trailer Jack item #TV64FR is only available with the mounting bracket.

view full answer...

Answer 6

Hi John, No, the Square A-Frame Jack #TJDA-5000S cannot be side mounted but we do have a similar option, with a sidewind handle and footplate, that can be, the Trailer Valet Trailer Jack #TV64FR.

view full answer...

Answer 7

I have a solution for you. While we do not have a pre-built weld-on swivel jack with a removable footplate, this can be assembled together with the following pieces: 1) Bulldog Round, Pipe-Mount Swivel Jack, part #BD1541150301. It's a swivel jack…

view full answer...

Answer 8

I have a replacement jack option for you, but I do not recommend cutting off the footplate and drilling a hole in the tube to mount a caster like the Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs Item #JC-102 to…

view full answer...

Answer 9

If you are looking for a jack with a wheel for moving the trailer the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW750D will be the jack that you want to look at, since the Pro Series Round, Pipe-Mount Swivel Jack w/ Footplate…

view full answer...

Answer 10

A suspension enhancement product like the SumoSprings #CSS-1125R or Firestone Coil-Rite #F4174 are primarily designed to suspend the weight of cargo carried in the vehicle itself. It's not always the best choice for counteracting the vehicle…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Availability of Replacement Drop Leg for Bulldog BD500188 Powered Trailer Jack

Continue Researching