Correct Rear Tie Down for 2020 Ram 3500 with Torklift 30k Super Magnum Hitch

Question

Question:

I need just the rear camper tie downs for a 2020 ram 3500 with a torklift 30k super magnum hitch.

asked by: Daniel L

0

Expert Reply:

The correct rear Torklift camper tie down for your 2020 Ram 3500 that has a Torklift Super Magnum Hitch is the part # TLR3510.

expert reply by: Jameson C

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

As we do not carry the Atwood jacks, I cannot confirm the fitment without knowing the measurements. However, the bolt holes on the HappiJac Swing Out Extension Brackets #LC182496 will measure 7-1/4" between all the bolt holes, picture included.…

view full answer...

Answer 3

The stake pocket Brophy camper tie downs part #TDSF that you mentioned only fit trucks up 2010 according to Brophy so you'd need to go a different route for your 2017 Ram 2500. You may be able to use Brophy Clamp On Camper Tie-Downs #HSAB though.…

view full answer...

Answer 4

Hey John. No, you will not have to remove your TorkLift SuperHitch item #TLD1111-30 or any tie downs to install the Hellwig Big Wig Rear Anti-Sway Bar item #HE24MR on your 2021 Ram 3500. Does your Ram 3500 have a diesel engine? The Hellwig Big Wig…

view full answer...

Answer 5

Hey John, congrats on the new truck. Yes, the Brophy Slide In Camper Tie-Downs - Extra Clearance item #HSAB can be used with your 2026 Ram 3500 dually. What turnbuckles did you use previously with your 2021 Lance 865?

view full answer...

Answer 6

The correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part #TLD2141 and #TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part #TLD1111-30. Since you have a dually you will also need to…

view full answer...

Answer 7

Hey Steven welcome back! Sorry to tell you but the TorkLift SuperHitch item #TLF1008-30 stopped fitting the F-350's and F-250's after the 2022 model year when Ford did the generation change. Ford changed the frame on the 14th generation so…

view full answer...

Answer 8

Hey Robert, the Torklift hitch you ordered does not come with new rear tie downs and you will need new ones. For that the correct rear tie downs is the part #TLR3510.

view full answer...

Answer 9

Your 2019 Ram 3500 4X4 diesel with the 8' bed and factory running boards under the cab. You have two options, depending on your vehicle's options. If you have the 8' bed with a fixed board under your cab with factory installed hitch, you…

view full answer...

Answer 10

For the front tie-down, you'd use the Torklift #TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use #TLD3113 for the rear, or if you have the…

view full answer...

Answer 11

The front Torklift tie down you need for a 2019 Ram 3500 without the steps is the part #TLD2140. The #TLD2142 that you mentioned only fits models with the factory steps.

view full answer...

Answer 12

I have a couple of pictures that I have linked for you showing the installed tie downs to use as reference. On the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part #TLD2142 and Rear part #TLD3112 there are no notes in regards to temporarily…

view full answer...

Correct Rear Tie Down for 2020 Ram 3500 with Torklift 30k Super Magnum Hitch

Product Page this Question was Asked From

Continue Researching