Replacement Bearing With 1.75 Inch Inner Diameter
Question:
I have an old RV type down trailer axle that I am trying to replace hub inner bearings and races. I measure the inner bearing I removed and it 1.75 ID and 2.89 OD. The spindle is tapered down from 1.75 to 1.25. I need the inner bearing, outer bearing both races and inner grease seal. I have no idea when this trailer was built as it is converted to an airboat trailer.
asked by: Gene M
Expert Reply:
We do have a bearing with a 1.75 inch inner diameter, the Replacement Trailer Hub Bearing # 25580.
That said, there are numerous bearings with a 1.25 inch inner diameter, and I wouldn't be able to tell you exactly which one you need, so I've linked them below for you. Same for the grease seal I'd need the inner and outer diameters but I've also linked the selection of those for you below. You'll want to measure your spindle where the seal rides to get the inner diameter at least.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Is Light Kit Needed for Covered Bike Rack at Rear of Fifth Wheel Trailer
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Correct Replacement for TDE 46210 Trailer Hub
- Article: How to Measure a Trailer Axle
- Q&A: What are the Dimensions of a #99 Spindle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What are the Dimensions of Curt Hook with Spring Loaded Safety Latch # C81840
- Q&A: Recommended Disc Brake Conversion Parts for a 5th Wheel Trailer w/ 8,000 lbs Axles
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)