Replacement Parts for 16K B&W Continuum Weight Distribution System w/ Sway Control

Question

Question:

Replacement parts for BW28FR?

asked by: Adam

0

Expert Reply:

The B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch # BW28FR can be broken up into 2 replacement part kits:

- Head Assembly # BW48FR
- Load Bars # BW38FR

expert reply by: Jon G

0

Answer 1

The B&W Continuum Weight Distribution System part #BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4"…

view full answer...

Answer 2

The B&W Continuum Weight Distribution System part #BW78FR requires at least 24" of space on the frame directly behind the coupler and along the side a few inches back from there. This works with most trailers but for some it will not and,…

view full answer...

Answer 3

I was able to speak with a representative from Bedslide today. He informed me that you will not be able to install the BedSlide Heavy-Duty Sliding Truck Bed Tray w/ T-Tracks - 5" Rails - 1,500 lbs - Black, part #BE42WR, on your truck with the…

view full answer...

Answer 4

The correct Bedslide install kit for a 2020 Ford F-250 with a 6-3/4 foot bed is the part #BE67WR since the truck has an aluminum bed. The part number that includes the Bedslide and hardare is the #BE52WR.

view full answer...

Answer 5

Hi David; the BringIt SwitchBack SOLO Down Tailgate Camera #BR75ZR can be used without a tailgate. You will need to mount the tilt sensor so the system thinks the tailgate is open for this to work. I would also cap off the unused connector with some…

view full answer...

Answer 6

Hey Frank. I can give you the dimensions of the shank on the B&W Continuum item #BW28FR but you're going to need to take the measurements on your Silverado 3500 to confirm the tailgate will open. From the hitch pin hole to the center of the…

view full answer...

Answer 7

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

view full answer...

Answer 8

Hey Jon, I have a solution for you but I would not recommend the Andersen Weight Distribution system part #AN33VR for your 2025 Brinkley Z Air 297. What we have found is that the Andersen system does a decent job with lighter weight trailers but for…

view full answer...

Answer 9

Honestly Tim, there is nothing on the B&W Continuum Weight Distribution System #BW28FR which provides any type of sway prevention. They rely on the fact that the truck will remain level which reduces trailer sway. Personally I recommend using the…

view full answer...

Answer 10

Welcome back Belinda! The Andersen Weight Distribution Hitch w Sway Control - 4" Drop/Rise - 16K GTW, 1.6K TW #AN33VR may work for towing your Grand Design Imagine XLS23LDE with your F-250. However, when we tested it a while back, we didn't…

view full answer...

Answer 11

Hi Marvin. Great question. The best option I’ve personally seen work well on Brinkley travel trailers with the propane box is the B&W Continuum (part #BW78FR if you have a 2-inch trailer hitch on your truck or #BW28FR if you have a 2.5-inch…

view full answer...

Answer 12

Hey Rick! Yes, the B&W Continuum #BW28FR will work with your Alliance Delta 292RL. This is designed to work with tongue weight ranging from 600 lbs - 1,600 lbs and has a max gross towing weight of 16,000 lbs so you're well within those…

view full answer...

Replacement Parts for 16K B&W Continuum Weight Distribution System w/ Sway Control

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching