Will a Longer Weight Distribution System Shank Work with B&W Continuum Weight Distribution System
Updated 01/05/2025 | Published 03/19/2023
Products Featured in This Question
Question:
I’m interested in the bandw continuum hitch but need the extended hitch to be able to let the tail gate down. I have an extended hitch already but can you tell me if the mounting holes that the head goes on is the same as other hitches. Or do you know the distance between the holes so I can measure mine to see if it will work with my existing hitch?
asked by: Steven
Expert Reply:
The B&W Continuum Weight Distribution System part # BW78FR is not compatible with any other weight distribution system shank. The hole spacing on the shank for the head adjustment is 1-1/2" on center which is more than the 1-1/4" industry standard therefore, the two are incompatible. I measured this for you. That said, B&W is currently testing a longer shank for this system that will allow you to lower the tailgate. It's however not yet available. In the meantime, you could install a jack on the outside of the frame with one like the Trailer Valet 5X Swivel Jack and Trailer Mover part # STC-V211 which also doubles as a mover, just keep in mind the trailer will be a bit less stable while parked with a jack in this location.
Product Page this Question was Asked From
B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Weight Distribution Hitch
- WD With Sway Control
- Hydraulic System
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: B&W Continuum WD Head Assembly - 2-1/2" Extended Shank - 2-5/16" Ball - 16K
- Shop: B&W Continuum WD Head Assembly - 2" Extended Shank - 2-5/16" Ball - 16K
- Search Results: b&w continuum weight distribution hitch
- Video: What to Know About the Furrion Vision S+ Wireless RV Backup System
- Video: Review of B and W Weight Distribution Hitch - BW22JR
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2" Hitch - 16K GTW, 1.6K TW
- Shop: B&W Continuum WD Head Assembly w/ Extended Drop - 2" Shank - 2-5/16" Ball - 16K
- Search Results: extended hitch shank
- Search Results: hitch anti~rattle
- Shop: Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 7" Screen
- Shop: B&W Continuum Weight Distribution w Sway Control and Long Shank - 16K GTW, 1.6K TW
- Search Results: solid stance
- Search Results: bug screen
- Search Results: water heater bug screen
- Search Results: furrion tankless water heater
- Shop: B&W Continuum Weight Distribution w Sway Control and Long Shank - 16K GTW, 1.6K TW
- Q&A: How Low Does The B&W Continuum Weight Distribution System Hang Below The Trailer?
- Q&A: Is Furrion Vision S+ Direct Replacement for Vision S
- Q&A: What Weight Distribution Hitch do I Need for My Travel Trailer That Weighs 7,000 Pounds?
- Q&A: Comparing B&W Continuum And Reese Strait-Line Weight Distribution Systems
- Q&A: Comparing ProPride and B and W Continuum Weight Distribution for Winnebago Minnie FLX2306
- Shop: Trailer Hitch
- Q&A: Will an Extended Weight Distribution Shank Effect Towing Performance
- Article: Determining Trailer Tongue Weight
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Shop: Towing Mirrors
- Shop: Roof Rack
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Q&A: Replacement Parts for 16K B&W Continuum Weight Distribution System w/ Sway Control
- Shop: Suspension Enhancement
William B.
1/5/2025
Cooper, I am in the same boat as Steven. When is B&W expected to have the longer hitch head shank completed? Is there any way to be kept apprised of updates from the B&W team?