Parts Needed to Install 7-Way and Brake Controller in 2019 Honda Passport

Published 09/12/2023

Question:

Greetings, I have a 2019 Honda Passport I need to set up a 7-way trailer connector supporting lights, power and braking, etc for a camper. I’ll also need a companion break controller. My hope is for 1. Ease of installation vid support preferred and value. BTW, I already have the 4 pole flat connector installed if that helps anything - it was from ETrailer but not sure the brand. Are the following recommended for my setup? Will I be missing any Honda specific parts such as wire harness, etc? Thank you and I’m glad to get any recommendations on my setup. Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector Item # CU86FR CU86FR Tekonsha Prodigy P3 Trailer Brake Controller Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors Item # HM48625

asked by: Greg M

Expert Reply:

You are on the right track to install the 7-way and brake controller in your 2019 Honda Passport. The first thing you need is the 7-way part # CU86FR and then to install the P3 part # 90195 you'd just need the part # 3070-P and you'd be set.

Then the mounting bracket part # HM48625 would work to mount the 7-way as well.

expert reply by: Jameson C