Does the 4-Way Wiring Harness for a 2002 Nissan Frontier Work w/ LED Tail Lights?

Question

Question:

with this harness connect does it work with LED tail lights or do I need to buy a converter for the LED Lights aswell.

asked by: Frank H

1

Helpful Expert Reply:

Yes, the T-One Vehicle Wiring Harness item # 118362 will work with LED tail lights so long as the original factory wiring is still being used. This harness is custom fit for the 2002 Nissan Frontier and plugs into your Nissan's wiring harness, which is located at the rear, near the passenger's side frame rail. So long as you have the original connector you will have no issues with the upgraded lighting.

expert reply by: Jerred H

1

Answer 1

The Nissan Frontier had a generation change between 2003 and 2004 but there are still a lot of similarities between the those two years. However, it does not appear the Curt wiring harness you looked at, part #C56FR, for the 2003 model will fit your…

view full answer...

Answer 2

To add a standard 4-way wiring harness to your 2002 Nissan Frontier XE, I recommend the Curt T-Connector Vehicle Wiring Harness item #C56FR. This custom-fit T-connector plugs into your Nissan's wiring harness, which is located under the vehicle…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Does the 4-Way Wiring Harness for a 2002 Nissan Frontier Work w/ LED Tail Lights?

Continue Researching